OMRON E2GA-M18KS05-WS-U1-Z 2M

Bar code reader
Read range: 100mm.
Interface: RS-232C.
Small, high reliability and low cost portable contact type bar code reader. Appearance: Shielded, M12.
Sensing distance: 4 mm.
Output configuration: DC 2-wire (no polarity).
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor .
Superior spatter resistance E2GA-M18KS05-WS-U1-Z 2M.
Long Sensing-distance Models added for sensing,
distances up to 15 mm E2GA-M18KS05-WS-U1-Z 2M
Pre-wired Smartclick Connector Models are also available. Release Key Type: Standard (metal).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Mechanical lock Solenoid release E2GA-M18KS05-WS-U1-Z 2M.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 5-contact Model,
Insert the built-in switch (E, F, G or H) into the blank @ .
Conduit size (See Note.): G1/2.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal E2GA-M18KS05-WS-U1-Z 2M.
A wide variety of built-in switches can be used for various devices .
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames.
The plastic material makes the Slide Key suitable,
for lightweight doors. Lock method: Solenoid lock.
Conduit size: M20.
Voltage for solenoid: 24 VDC.
With LED indicator 1NC/1NO+ 1NC (Slow-action).
Release Protective Cover Locks Using.
Controller Signals or Pushbutton.
Switches after the Cutting Tool Stops.
Moving Due to Inertia.
A mechanical lock is applied automatically when the Operation.
Key is inserted. A high level of safety is achieved using a,
mechanism where the lock is only released when voltage is,
applied to the solenoid.
Conforms to EN (TÜV) standards corresponding to the CE marking.
Certified by UL, CSA and CCC standards.
The Switch contact is opened by a direct opening mechanism,
(NC contacts only) when the protective cover is opened.
Direct opening mechanism that is EN-certified is indicated by,
on the Switch.
Auxiliary release key ensures easy maintenance and unlocks the,
door in the case of a power failure.
Tough aluminum die-cast body inncorporating a switch box with,
degree of protection satisfying IP67, UL, and CSA TYPE6P, 13 E2GA-M18KS05-WS-U1-Z 2M.
Equipped with a horizontal and vertical conduit opening.
Models incorporating easy-to-see indicators for monitoring and,
those using an adjustable Operation Key fforr a swinging door are available E2GA-M18KS05-WS-U1-Z 2M.
The mounting direction of the head can be changed,
to allow the Operation Key to be inserted from four directions.
E2GA-M18KS05-WS-U1-Z 2M Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=E2GA-M18KS05-WS-U1-Z 2M&select=5