OMRON E3T-SL21-M1TJ 0.3M

Shape of box: Without flange.
Actuator: Bevel plunger.
Conduit: Two on the side.
A New Monoblock Multiple Limit Switch.
Incorporating a Head Box with a Tough.
Head and Ensuring High Sealing.
Performance and a Mechanical.
Durability of 5,000,000 Operations.
Used for the sequential control of a variety of engineering .
machines and belt conveyor lines E3T-SL21-M1TJ 0.3M.
Built-in oil filter shuts out oil and water E3T-SL21-M1TJ 0.3M
Approved by EN, IEC (Ground terminal models only.) and,
CCC (Chinese standard). Ask your OMRON representative,
for information on approved models.
Ground terminal models bear the CE mark. Rated voltage: 115 V .
Permitted voltage fluctuation range: 85% to 110% rated voltage E3T-SL21-M1TJ 0.3M.
Frequency: 50/60 Hz .
Rated current: 50 Hz, 0.190 A; 60 Hz, 0.160 A .
Rated input: 50 Hz, 15 W ; 60 Hz, 14 W .
Rated rotational speed: 50 Hz, 2450 r/min; 60 Hz, 2700 r/min.
Maximum flow rate: 50 Hz, 2.2 m3/min; 60 Hz, 2.5 m3/min.
Maximum static pressure: 50 Hz, 63.7 Pa; 60 Hz, 63.7 Pa.
Noise: 50 Hz, 39 dB; 60 Hz, 42 dB.
Optimum Cooling with a Comprehensive E3T-SL21-M1TJ 0.3M.
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment .
Shaft supported by ball bearings for highly-reliable operation.
Plastic-bladed models (44 type) and metal-bladed models,
(28 type) included in series.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certified safety standards depend on the,
product. Check the information given for available models of Axial fans and,
the information in Characteristics. A New-concept SSR with Built-in.
Current Transformer.
Heater Burnout and SSR Short.
circuit Failure Detection.
Built-in Current Transformer (CT) helps reduce wiring steps.
Detects the burnout of any one of a ggroup of heaters E3T-SL21-M1TJ 0.3M.
Detects the burnout of 3-phase heaters .
Detects SSR short-circuit failures.
Error detection level can be easily set with a switch.
Mounts to a DIN track or with screws.
Three types of input terminals available: M3 terminals,
screwless clamp teerminals (detachable), or compact slotted,
screw terminals (detachable) E3T-SL21-M1TJ 0.3M.
Certified for CSA and EN (TÜV).
The G3PF-2@@B-@@@ Series is UL certified.
E3T-SL21-M1TJ 0.3M Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=E3T-SL21-M1TJ 0.3M&select=5