OMRON E3T-ST22-M1TJ 0.3M

Ratings: Standard load; 4 A at 30 VDC.
Cable: VCTF cable *2.
Actuator: Roller lever, high sensitivity.
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models . )
Sealing characteristics that meet IEC IP67 degree of protection E3T-ST22-M1TJ 0.3M.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material E3T-ST22-M1TJ 0.3M
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables E3T-ST22-M1TJ 0.3M.
Multiple mounting possible with Switches with Plungers .
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Control output: Linear current output *1.
Auxiliary output: Two.
Communications: -- E3T-ST22-M1TJ 0.3M.
Heater burnot: Detection for Single-phase heater.
Event inputs: One .
Power supply voltage: 24 VAC/VDC.
The E5DC-800 Mounts to DIN Track and Is Ideal,
for Connections to HMIs and PLCs.
It provides the Same Easy Operation and,
Advanced Performance as the Rest of the,
E5@C-800 Series.
A slim body at 85 × 22.5 mm (D × W) that fits into narrow control,
panels and mounts to DIN Track.
Removable terminal block for easy replacement to simplify maintenance.
High-speed sampling at 50 ms for applications with high-speed,
temperature increases.
Easy connections to a PLC with programless communications.
Models are available with up to 2 auxiliary outputs and 1 event input to,
complete basic functions.
A white PV display (height: 8.55 mm) is easy to rread when setting up,
checking alarms, and making settings in a control panel E3T-ST22-M1TJ 0.3M. Capacity: 32K word.
Access time: 150ns.
When using SYSMAC-CPT, can not be written in EPROM.
To write a program to the EPROM, use the standard PROM writer.
Before the EPPPRROM memory card into the CPU, to connect the EPROM to the EPROM memory card E3T-ST22-M1TJ 0.3M.
If you remove the EPROM memory card from the CPU,
Will not lose its data.
E3T-ST22-M1TJ 0.3M Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=E3T-ST22-M1TJ 0.3M&select=5