OMRON E52-P50C D=8

Type: Mark-detecting models (blue LED).
Control output: ON/OFF output.
Model: NPN output.
The Ultimate Fiber Amplifier for.
Maximum Ease of Use and High.
Performance. Output: DPDT.
Lighting: Non-lighted.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; Non-lighted .
Item: Alternate operation (Self-holding) E52-P50C D=8.
Separate Construction with.
Cylindrical 16-dia E52-P50C D=8 Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Contact configuration: Four SPST-NO relays E52-P50C D=8.
Heat sink: Yes.
Built-in SSRs: G3S-201PL-PD .
Zero cross function: No.
Applicable output load: 1 A at 75 to 264 VAC (See note 1.).
Rated voltage: 5 VDC, 12 VDC, 24 VDC.
Compact Terminal SSR with 4 Outputs.
Easy-to-use SSR block that combines four compact G3S SSRs,
sockets, and heat sink in one unit.
Easy wiring with separate I/O terminal construction.
LED operation indicator E52-P50C D=8.
Special socket used for easy Relay replacement .
Mounts either on DIN track or with screws. Type: rectangle.
Screen mode: level 2.
Using voltage: DC5V.
Color: white.
Color: blue.
Micro design, the length of the body is only 23mm.
LED has five colors (red, yellow, green, white, and blue).
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient. Time specification: Inverse type.
Current setting range: 8 to 26 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked eaasily because operation time,
is indicated from the start of operation E52-P50C D=8.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, annd load conditions E52-P50C D=8. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
E52-P50C D=8 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=E52-P50C D=8&select=5