OMRON E6C2-CWZ6C 600P/R 2M

Operating modes: Flicker OFF start.
Supply voltage: 110 VAC (50/60 Hz), 220 VAC (50/60 Hz).
Independent ON- and OFF-time settings. Furthermore,
combinations of long ON- or OFF-time and,
short OFF- or ON-time settings are possible.
Wide time ranges from 0.05 s to 300 h.
Easy sequence checks through instantaneous,
outputs for a zero set value at any time range E6C2-CWZ6C 600P/R 2M.
Approved by UL, CSA, CE and CCC E6C2-CWZ6C 600P/R 2M I/O classification: Temperature inputs.
I/O points: 4 inputs.
I/O connections: Terminal block.
Power supply voltage: 24 VDC.
Input specification: Platinum resistance thermometer.
Temperature Input Units for use with MULTIPLE I/O TERMINAL E6C2-CWZ6C 600P/R 2M.
Four inputs.
Thermocouples and platinum resistance thermometer models,
are available .
Conversion time is only 250 ms for 4 inputs.
The Configurator can be used to calibrate temperatures.
The circuit section can be removed, so rewiring isn’t,
required during maintenance.
DIN track mounting. Actuator: Adjustable roller lever, form lock (metal lever, rubber roller).
Conduit size: 2-conduit; G1/2 E6C2-CWZ6C 600P/R 2M.
Built-in switch mechanism: 1NC/1NO (Slow-action) .
A Series of Pull-reset Models Now.
Available.
Lineup includes three contact models with 2NC/1NO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC.
M12-connector models are available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC. Type of input: AC voltage input.
Output type: communication; RS-232C; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) deppth
Some modelss are not equipped with E6C2-CWZ6C 600P/R 2M.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub prressure gauge for monitoring the operation trend E6C2-CWZ6C 600P/R 2M.
External event input can be applied to a variety of measurement and identification situations.
Dev
E6C2-CWZ6C 600P/R 2M Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=E6C2-CWZ6C 600P/R 2M&select=5