OMRON E6C3-AG5C 360P/R 2M

Time specification: Inverse type.
Current setting range: 2 to 8 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage .
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase E6C3-AG5C 360P/R 2M
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction E6C3-AG5C 360P/R 2M.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions . Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Release Protective Cover Locks Using.
Controller Signals or Pushbutton.
Switches after the Cutting Tool Stops E6C3-AG5C 360P/R 2M.
Moving Due to Inertia.
A mechanical lock is applied automatically when the Operation .
Key is inserted. A high level of safety is achieved using a,
mechanism where the lock is only released when voltage is,
applied to the solenoid.
Conforms to EN (TÜV) standards corresponding to the CE marking.
Certified by UL, CSA and CCC standards.
The Switch contact is opened by a direct opening mechanism,
(NC contacts only) when the protective cover is opened.
Direct opening mechanism that is EN-certified is indicated by,
on the Switch.
Auxiliary release key ensures easy maintenance and unlocks the,
door in the case of a power failure.
Tough aluminum die-cast boddy incorporating a switch box with,
degree of protection satisfying IP67, UL, and CSA TYPE6P, 13 E6C3-AG5C 360P/R 2M.
Equipped with a horizontal and vertical conduit opening.
Models incorporating easy-to-see indicators for monitoring and,
those using an adjustable Operation Key fforr a swinging door are available E6C3-AG5C 360P/R 2M.
The mounting direction of the head can be changed,
to allow the Operation Key to be inserted from four directions.
E6C3-AG5C 360P/R 2M Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=E6C3-AG5C 360P/R 2M&select=5