Output: DPDT.
Lighting: Incandescent lamp.
Operating voltage: 24 VAC/VDC.
G: green, A: blue; W: white; PW: pure white.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1.
Contact type: Microload (125 VAC, 0.1 A; 30 VDC 0.1 A).
Operation: Momentary operation (Self-resetting).
Output: SPDT.
Lighting: Incandescent lamp, 28 VDC.
Operation Unit color symbol: Enter the desired color symbol for the Pushbutton,
in @@. R (Red); Y (Yellow); G (Green); A (Blue); W (White).
Pushbutton Switch Series with OMRON A16L-JPYA-24-2.
Square 40-mm Body.
Combines miniature design with distinct but soft sense of operation
A16L-JPYA-24-2
Easy panel mounting from the front and simple lamp replacement.
without tools. Actuator: Coil spring (spring diameter: 6.5).
Indicator: LED.
Item: Basic.
Pretravel (PT): 20±10 mm.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches OMRON A16L-JPYA-24-2.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC OMRON A16L-JPYA-24-2.
Contact your OMRON representative for information on approved models. Model: A7D.
Classification(See note 1.): Snap-in (front mounting).
Output code number: 06 (binary coded decimal) A16L-JPYA-24-2 OMRON.
Terminals: PCB terminals.
Color: Black.
Ultra-small, Low-cost, Push-operated.
Switches.
All-in-one design means fewer parts are required. This product,
delivers high reliability at a low cost A16L-JPYA-24-2 OMRON.
Uses long-lasting resin springs to achieve a long mechanical,
durability expectancy of 30,000 operations.
Models with stoppers for restricting the setting range are available.
The series includes a complete range of pen-push models that,
prevent accidental operation A16L-JPYA-24-2 OMRON. Type: rectangle.
Screen mode: no segmentation.
Output: DPDT.
Power supply voltage: DC12V.
Contact type: standard load (AC250V, 3A; DC30V, 3A).
Operation: instantaneous action (auto reset).
Operation Department color: yellow.
In the touch and the ability to protect than OMRON''s previous models have improved.
The micro volume design of 23mm is realized A16L-JPYA-24-2.
Micro design and unique combination of soft sensing.
LED has five colors (red, yellow, green, white, and blue).
Built in basic switch improves touch.
Built in basic switches in the previous modell based on the OMRON to improve the protection OMRON A16L-JPYA-24-2.
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient.