Home
>> Products
>> MITSUBISHI
>> Ans/QnAs series PLC
>> Ethernet interface module
>> A1SJ71QE71N3-T | MITSUBISHI A1SJ71QE71N3-T Ethernet module
A1SJ71QE71N3-T | MITSUBISHI A1SJ71QE71N3-T Ethernet module
Brand:
MITSUBISHI
Name: Ethernet module
Model: A1SJ71QE71N3-T
10BASE-T.
Q mode.
MITSUBISHI PLC is the main product in the production of MITSUBISHI motor in Dalian.
It uses a kind of programmable memory for its internal storage procedures,
Execute logic operation, sequence control, timing, counting and arithmetic operations, user oriented instruction,
And through digital or analog input / output control of various types of machinery or production process.
When the programmer input programinto the user program memory,
Then CPU according to the function of the system (the system program memory to explain the compiler),
Translate the user program into PLC internally recognized by the user to compile the program.
...More relevant models >>>>
Name: Ethernet module
Model: A1SJ71QE71N3-T
10BASE-T.
Q mode.
MITSUBISHI PLC is the main product in the production of MITSUBISHI motor in Dalian.
It uses a kind of programmable memory for its internal storage procedures,
Execute logic operation, sequence control, timing, counting and arithmetic operations, user oriented instruction,
And through digital or analog input / output control of various types of machinery or production process.
When the programmer input programinto the user program memory,
Then CPU according to the function of the system (the system program memory to explain the compiler),
Translate the user program into PLC internally recognized by the user to compile the program.
Interface: RS232C.
Transmission distance: 15 meters.
A1SJ71UC24-R2/R4/PR computer communication components can communicate with PLC, such as computers and other external intelligent devices, and the components are as follows:
Full / half duplex transmission.
4 special communication protocols.
No protocol and bidirectional mode MITSUBISHI A1SJ71QE71N3-T.
Protocol selection switch function.
The optional baud rate, the highest 19 A1SJ71QE71N3-T2K.
Since the echo diagnostic test. Signal transmission device B/NET interface device for power distribution control equipment
The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it,
Lag time, this is the time constant of the input circuit,
The time constant of the output circuit, the arrangement of the user statement and the use of the instruction,
The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on MITSUBISHI A1SJ71QE71N3-T.
This phenomenon is called the I/O delay time effect.
Input status and input information input from the input interface,
CPU will be stored in the working data memory or in the input image register MITSUBISHI A1SJ71QE71N3-T.
And then combine the data and the program with CPU.
The result is stored in the output image register or the working data memory,
And then output to the output interface, control the external drive A1SJ71QE71N3-T MITSUBISHI. AnS, QnAS bus connection, the reader to write program 1 channel connection.CPU:A2SHCPU PLC is the same A1SJ71QE71N3-T MITSUBISHI.
PLC program capacity: 30K step.
I/O points: 1024 points.
Processing speed (sequential order): 0.25 s/ step.
Control axis: up to 8.
Servo program capacity: 13K step.
Servo amplifier: SSCNET connected external servo amplifier.
PLC programming has a wide range of applications, powerful, easy to use, has become one of the main devices of modern industrial automation,
In all areas of industrial production has been widely used,
Applications in other areas (such as civil and home automation) have also been rapidly developed A1SJ71QE71N3-T MITSUBISHI.
It uses programmable memory,
An instruction used to perform logical operations, sequence control, timing, counting and arithmetic operations in its internal storage,
And through digital, analog input and output,
Control of various types of machinery or production processes. Programmable controller and related equipment,
Should be easyy to make the industrial control system to form a whole, easy to expand the principle design of its functions A1SJ71QE71N3-T.
As can be seen from the above definition, PLC is a program to change the control function of the industrial conttrol computer,
In addition to the completion of a wide variety of control functions, as well as with other computer communications networking features MITSUBISHI A1SJ71QE71N3-T.
Transmission distance: 15 meters.
A1SJ71UC24-R2/R4/PR computer communication components can communicate with PLC, such as computers and other external intelligent devices, and the components are as follows:
Full / half duplex transmission.
4 special communication protocols.
No protocol and bidirectional mode MITSUBISHI A1SJ71QE71N3-T.
Protocol selection switch function.
The optional baud rate, the highest 19 A1SJ71QE71N3-T2K.
Since the echo diagnostic test. Signal transmission device B/NET interface device for power distribution control equipment
The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it,
Lag time, this is the time constant of the input circuit,
The time constant of the output circuit, the arrangement of the user statement and the use of the instruction,
The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on MITSUBISHI A1SJ71QE71N3-T.
This phenomenon is called the I/O delay time effect.
Input status and input information input from the input interface,
CPU will be stored in the working data memory or in the input image register MITSUBISHI A1SJ71QE71N3-T.
And then combine the data and the program with CPU.
The result is stored in the output image register or the working data memory,
And then output to the output interface, control the external drive A1SJ71QE71N3-T MITSUBISHI. AnS, QnAS bus connection, the reader to write program 1 channel connection.CPU:A2SHCPU PLC is the same A1SJ71QE71N3-T MITSUBISHI.
PLC program capacity: 30K step.
I/O points: 1024 points.
Processing speed (sequential order): 0.25 s/ step.
Control axis: up to 8.
Servo program capacity: 13K step.
Servo amplifier: SSCNET connected external servo amplifier.
PLC programming has a wide range of applications, powerful, easy to use, has become one of the main devices of modern industrial automation,
In all areas of industrial production has been widely used,
Applications in other areas (such as civil and home automation) have also been rapidly developed A1SJ71QE71N3-T MITSUBISHI.
It uses programmable memory,
An instruction used to perform logical operations, sequence control, timing, counting and arithmetic operations in its internal storage,
And through digital, analog input and output,
Control of various types of machinery or production processes. Programmable controller and related equipment,
Should be easyy to make the industrial control system to form a whole, easy to expand the principle design of its functions A1SJ71QE71N3-T.
As can be seen from the above definition, PLC is a program to change the control function of the industrial conttrol computer,
In addition to the completion of a wide variety of control functions, as well as with other computer communications networking features MITSUBISHI A1SJ71QE71N3-T.
...More relevant models >>>>
Last one: MITSUBISHI Ethernet module A1SJ71E71N-B5
next one: MITSUBISHI Ethernet module A1SJ71QE71N-B2
Related download