Can be switched from micro load (minimum applicable load 1mA DC5V) to large capacity load.
Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Pin plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection A3AA-90L1-00Y OMRON.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating)
A3AA-90L1-00Y
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Output: SPDT.
Lighting: Incandescent lamp.
Operating voltage: 24 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white A3AA-90L1-00Y OMRON.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Item: Operation indicator (LED) *1; Basic 15±5° A3AA-90L1-00Y OMRON.
Actuator: Roller lever, direct-wired connector; 2 conductors; DC.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UUL, cUL, and CCC A3AA-90L1-00Y.
Contact your OMRON representative for information on approved models. Actuator type: Cam roller arm.
Operating direction: Two-side operation.
Small, Lightweight Enclosed.
Switches.
V-series Switches were placed iin diecast cases to provide,
superior dust resistance and mechanical strength A3AA-90L1-00Y.
Cam arms and cam roller arms can be set to any position,
within 360°.