Contact type: Microload (125 VAC, 0.1 A; 30 VDC 0.1 A).
Operation: Momentary operation (Self-resetting).
Output: SPDT.
Lighting: Incandescent lamp, 28 VDC.
Operation Unit color symbol: Enter the desired color symbol for the Pushbutton,
in @@. R (Red); Y (Yellow); G (Green); A (Blue); W (White).
Pushbutton Switch Series with.
Square 40-mm Body.
Combines miniature design with distinct but soft sense of operation.
Easy panel mounting from the front and simple lamp replacement.
without tools.
Name: electrode with 4P.
The installation and disassembly are very simple and can be used in deep wells.
The electrode is a stainless steel wire with a layer of vinyl chloride, and the electrode is not in contact with the electrode.
Can also be used in space such as sink and ceiling.
Easy accumulation of deep well pump sewage, the scale can be used PH-1;
In the distance from the depth of the water use, can choose PH-2 OMRON A3SJ-90E3-28YG
A3SJ-90E3-28YG Ratings: Standard load; 0.1 A at 125 VAC, 0.1 A at 30 VDC.
Cable: VCTF oil-resistant cable *1.
Actuator: Roller lever, high sensitivity.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard) OMRON A3SJ-90E3-28YG.
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables OMRON A3SJ-90E3-28YG.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation A3SJ-90E3-28YG OMRON. )
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Appearance: Round/Half-guard type LED lighting,
(without Voltage Reduction Unit) A22L-H A3SJ-90E3-28YG OMRON.
Output: SPST-NC.
Lighting: LED.
Operating voltage: 24 VAC/VDC.
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit A3SJJ-90E3-28YG OMRON A3SJ-90E3-28YG.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounteed using either open-type (fork-type) or closed-type OMRON A3SJ-90E3-28YG.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models).