Home
>> Products
>> MITSUBISHI
>> Touch Screen
>> Touch screen accessories
>> GOT-A900 touch screen accessories
>> A9GT-QC250BS Q bus connecting cable MITSUBISHI A9GT-QC250BS
A9GT-QC250BS Q bus connecting cable MITSUBISHI A9GT-QC250BS
Brand:
MITSUBISHI
Name: Q bus connecting cable
Model: A9GT-QC250BS
Cable length: 25 meters.
For QCPU and GOT (need A9GT-QCNB) connection.
For the connection between GOT and GOT.
...More relevant models >>>>
Name: Q bus connecting cable
Model: A9GT-QC250BS
Cable length: 25 meters.
For QCPU and GOT (need A9GT-QCNB) connection.
For the connection between GOT and GOT.
Cable length: 10m.
For connection between FXCPU (MINI-DIN8 pin connector) and GOT.
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT.
Applicable models: GT16, GT15, GT11, HandyGOT, GT10, GT27, GT25, GT23,, GT21. Ethernet (100Base-TX) unit.
Applicable models: GT15, GT16 MITSUBISHI A9GT-QC250BS. Cable length: 0.7m.
For the connection between QnAS/AnSCPU/ motion controller A7GT-CNB (A Series) and CPU A9GT-QC250BS
Applicable models: GT16, GT15, GT11. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 12.1 inches.
Display color: 256 color or more color.
Installation type: compatible with video /RGB.
Resolution: SVGA (800 x 600) MITSUBISHI A9GT-QC250BS.
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system MITSUBISHI A9GT-QC250BS A9GT-QC250BS MITSUBISHI.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driveer,
This will cause the system to run in conflict, so that the touch screen system can not be used properly A9GT-QC250BS MITSUBISHI A9GT-QC250BS MITSUBISHI A9GT-QC250BS. Connecting cable for handheld RH GOT and PLC.
Cable length: 3 meteers MITSUBISHI A9GT-QC250BS.
Application: RS-422 connection and RS-232C connection. A set of 5 (LOGO removable, man-machine interface provides one).
Applicable model: A960GOT.
For connection between FXCPU (MINI-DIN8 pin connector) and GOT.
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT.
Applicable models: GT16, GT15, GT11, HandyGOT, GT10, GT27, GT25, GT23,, GT21. Ethernet (100Base-TX) unit.
Applicable models: GT15, GT16 MITSUBISHI A9GT-QC250BS. Cable length: 0.7m.
For the connection between QnAS/AnSCPU/ motion controller A7GT-CNB (A Series) and CPU A9GT-QC250BS
Applicable models: GT16, GT15, GT11. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 12.1 inches.
Display color: 256 color or more color.
Installation type: compatible with video /RGB.
Resolution: SVGA (800 x 600) MITSUBISHI A9GT-QC250BS.
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system MITSUBISHI A9GT-QC250BS A9GT-QC250BS MITSUBISHI.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driveer,
This will cause the system to run in conflict, so that the touch screen system can not be used properly A9GT-QC250BS MITSUBISHI A9GT-QC250BS MITSUBISHI A9GT-QC250BS. Connecting cable for handheld RH GOT and PLC.
Cable length: 3 meteers MITSUBISHI A9GT-QC250BS.
Application: RS-422 connection and RS-232C connection. A set of 5 (LOGO removable, man-machine interface provides one).
Applicable model: A960GOT.
...More relevant models >>>>
Last one: MITSUBISHI Q bus connecting cable A9GT-QC200BS
next one: MITSUBISHI Q bus connecting cable A9GT-QC300BS
Related download