Home
>> Products
>> OMRON
>> Sensor
>> Photoelectric sensor
>> Photoelectric sensor power built-in type
>> Built-in Power Supply Photoelectric Sensor E3JK-DN11 2M OMRON E3JK-DN11 2M
Built-in Power Supply Photoelectric Sensor E3JK-DN11 2M OMRON E3JK-DN11 2M
Brand:
OMRON
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-DN11 2M
Power supply voltage: DC.
Sensing method: Diffuse-reflective.
Sensing distance: 2.5 m.
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
...More relevant models >>>>
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-DN11 2M
Power supply voltage: DC.
Sensing method: Diffuse-reflective.
Sensing distance: 2.5 m.
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
Amplifier Units.
Power supply/Output: DC/(NPN).
Timer function: Yes.
Self-diagnostic output: Yes.
Separate Amplifier Sensor with.
Sensitivity Adjustment.
Compact design with smaller Sensor Head.
Heat-resistance model available for application between.
-10 and 200°C. E3JK-R11 regression reflection type,
E3JK direct current mode: mode; ON,
Miniature amplifier built-in type photoelectric switchSensing method: Diffuse reflective OMRON E3JK-DN11 2M E3JK-DN11 2M
Appearance: Vertical.
Connection method: Pre-wired .
Sensing distance: 30 to 50 mm.
Model: PNP Open collector output type .
Both Red-light Models and Green,
light Models to Detect a Wide Variety,
of Colors. Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1 OMRON E3JK-DN11 2M. 5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. E32-T54 type: environment resistant; heat resistant,
Speciality: heat resistance of 150 DEG C: side view,
Shape / detection distance (mm): 300; 230; 150 (60),
Bending radius (mm): R35 OMRON E3JK-DN11 2M.
Standard test object (minimum test object) (mm) 1: 1.5 (0.1),
Fiber element for meeting diversified needsMeasurement range: 5 mm E3JK-DN11 2M OMRON.
Output specifications: 4 to 20 mA.
Actuator: Ball type.
Resolution: 10 µm.
Contact Displacement Sensor with Built-in.
Amplifier That Enables In-line Measurement E3JK-DN11 2M OMRON.
of a Wide Range of Objects with a Low.
Operating Force.
Works with a low operating force (0.29 N) to detect a wide vari,
ety of objects including glass, plastic, and rubber objects.
Models with digital output for B7A Units and models with 4- to,
20-mA linear output corresponding to the 0- to 5-mm measure,
ment range are available E3JK-DN11 2M OMRON.
Models with ball-, flat-, orr pin-type actuators are available for a,
wide variety of objects E3JK-DN11 2M.
The XS3 Sensor I/O Connector makes Sensor connections simple. Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
wwith reduced problems due to workpiece collisions OMRON E3JK-DN11 2M.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature.
Power supply/Output: DC/(NPN).
Timer function: Yes.
Self-diagnostic output: Yes.
Separate Amplifier Sensor with.
Sensitivity Adjustment.
Compact design with smaller Sensor Head.
Heat-resistance model available for application between.
-10 and 200°C. E3JK-R11 regression reflection type,
E3JK direct current mode: mode; ON,
Miniature amplifier built-in type photoelectric switchSensing method: Diffuse reflective OMRON E3JK-DN11 2M E3JK-DN11 2M
Appearance: Vertical.
Connection method: Pre-wired .
Sensing distance: 30 to 50 mm.
Model: PNP Open collector output type .
Both Red-light Models and Green,
light Models to Detect a Wide Variety,
of Colors. Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1 OMRON E3JK-DN11 2M. 5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. E32-T54 type: environment resistant; heat resistant,
Speciality: heat resistance of 150 DEG C: side view,
Shape / detection distance (mm): 300; 230; 150 (60),
Bending radius (mm): R35 OMRON E3JK-DN11 2M.
Standard test object (minimum test object) (mm) 1: 1.5 (0.1),
Fiber element for meeting diversified needsMeasurement range: 5 mm E3JK-DN11 2M OMRON.
Output specifications: 4 to 20 mA.
Actuator: Ball type.
Resolution: 10 µm.
Contact Displacement Sensor with Built-in.
Amplifier That Enables In-line Measurement E3JK-DN11 2M OMRON.
of a Wide Range of Objects with a Low.
Operating Force.
Works with a low operating force (0.29 N) to detect a wide vari,
ety of objects including glass, plastic, and rubber objects.
Models with digital output for B7A Units and models with 4- to,
20-mA linear output corresponding to the 0- to 5-mm measure,
ment range are available E3JK-DN11 2M OMRON.
Models with ball-, flat-, orr pin-type actuators are available for a,
wide variety of objects E3JK-DN11 2M.
The XS3 Sensor I/O Connector makes Sensor connections simple. Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
wwith reduced problems due to workpiece collisions OMRON E3JK-DN11 2M.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature.
...More relevant models >>>>
Last one: OMRON Built-in Power Supply Photoelectric Sensor E3JK-RP12 2M
next one: OMRON Built-in Power Supply Photoelectric Sensor E3JK-DP11 2M
Related download