CA3-BUSCVR-01 | Proface CA3-BUSCVR-01 Extended bus interface

Memory for extending EX GP-Pro alarm and character table functions.For the man-machine interface hanging in the neck lanyard.Portable GP2000H series models accessories, RS-422 single head cable (3 m).To prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionInterface module for the simultaneous use of A/QnA/FX series external controller7 Proface CA3-BUSCVR-01 CA3-BUSCVR-01 5 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine Proface CA3-BUSCVR-01. 10.4 inches (TFT), the replacement of the host backlight (1).USB cable clamp for preventing disconnection of connection (5 / set)COM1 interface with the cable for direct connection to the CPU series PLC ATouch screen anti ultraviolet protective film (1 pieces).Data transmission cable between host and LT series. Length: 5 meters.Cable for connecting GP3000 to various modulesFor 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set) Proface CA3-BUSCVR-01. COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function CA3-BUSCVR-01 Proface. (1)Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interface3 CA3-BUSCVR-01 Proface. 5 inch screen protective cover (1 pieces)Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. Used to innstall the man-machine interface to the fixed panel CA3-BUSCVR-01. (4 / set)Clock battery, save system date and time when power is off CA3-BUSCVR-01 Proface. For 5.7 inch models, for fixing the hooks of the three EX modules.Backup battery foor time and data backup (1) Proface CA3-BUSCVR-01. Slave station module for connecting support for CANopenApplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).