CRT1-OD08TAH-1 | OMRON CRT1-OD08TAH-1 CompoNet Gateway Unit for CC-Link

OMRON CompoNet Gateway Unit for CC-LinkCRT1-OD08TAH-1

CRT1-OD08TAH-1 Introduce | CRT1-OD08TAH-1 Catalog / Manual / Instructions / Software download

Brand: OMRON
Name: CompoNet Gateway Unit for CC-Link
Model: CRT1-OD08TAH-1
Name: Three-tier Screw Terminal Block.
Specifications: Outputs; 8 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.

I/O classification: Counter Unit.
External I/O points: Inputs: 1, Outputs: 2.
I/O connections: Terminal block.
Operating mode: Linear counter.
A Counter Unit Supporting Encoder,
Input for Use with MULTIPLE I/O TERMINAL.
High-speed pulse with counting speed of 50 kHz.
Counting can be set to a multiplication factor of 1 or 4 OMRON CRT1-OD08TAH-1.
Wide range of measurement: -8,388,608 to 8,388,607 CRT1-OD08TAH-1
One external input and two external outputs are available.
DIN track mounting. Input/Output: Outputs.
Internal I/O circuit common: PNP (+ common).
I/O points: 8 points.
I/O connection method: Sensor connector.
Rated voltage for I/O power supply: 24 VDC.
Eight Waterproof Terminal Models.
Emphasizing Cost Efficiency OMRON CRT1-OD08TAH-1.
Reduced Labor.
Connection using connectors reduces the lead time,
required for installation. No tools are required for,
connection to a variety of devices.
Reduced Wiring.
Signal line wiring has been reduced so that the,
Terminal can be mounted closer to sensors and,
other devices.
Relay Box not Required.
Environment-resistant, dust-tight, drip-proof,
construction (IP67) enables direct on-site,
mounting OMRON CRT1-OD08TAH-1.
Easier Maintenance.
Significant reductions not only in setup time but also,
maintenance time.
Reduced Space, Improved Operability,
Compact design (160 x 54 mm (W x H)) (8-point models) CRT1-OD08TAH-1 OMRON.
Settings and connections can be performed using,
the switch and connectors on the front side of the Terminal.
System Configuration. Name: Two-tier Screw Terminal Block CRT1-OD08TAH-1 OMRON.
Specifications: Outputs; 8 outputs; NPN.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-leveel I/O distribution reduces,
wiring in the system CRT1-OD08TAH-1.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CRT1-OD08TAH-1 OMRON.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee OMRON CRT1-OD08TAH-1.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.

...More relevant models >>>>