Home
>> Products
>> MITSUBISHI
>> Servo driver/Servo motor
>> Servo accessories
>> MR-J3 accessories
>> Connector kit MR-ECN3 MITSUBISHI MR-ECN3
Connector kit MR-ECN3 MITSUBISHI MR-ECN3
Brand:
MITSUBISHI
Name: Connector kit
Model: MR-ECN3
Adapter kit (for CN3)
...More relevant models >>>>
Name: Connector kit
Model: MR-ECN3
Adapter kit (for CN3)
MITSUBISHI general purpose AC servo amplifier MR-J2 series.
Rated output: 1.0kw.
Interface: general purpose interface.
Voltage: three phase AC200V.
MITSUBISHI servo system in the MITSUBISHI servo amplifier is widely used,
It can not only be used in the high precision position control and speed control of the working machinery and general industrial machinery,
Can also be used in the field of speed control and tension control MITSUBISHI MR-ECN3 MR-ECN3
By installing a personal computer with a servo setting software, the parameters setting, trial run, state display, and gain adjustment are performed.
MITSUBISHI servo system MR-J2S column is developed on the basis of the servo MR-J2 series with a higher performance and more features of the MITSUBISHI servo system,
The control modes are position control, speed control and torque control, as well as the switching control mode among them MITSUBISHI MR-ECN3. Motor series: low inertia, low power.
Rated output power: 0.4kw.
Rated speed: 10000r/min.
Whether with brake: No.
Shaft end: Standard (straight).
Protection level: IP55 does not include the shaft part and the connector.
Features: low inertia is particularly suitable for high speed motor (6000 or 12000 RPM / min) of general industrial machinery MITSUBISHI MR-ECN3.
Application example 1: drive belt drive, robot.
Application example 2: assembly machine, sewing machine, X-Y working table MR-ECN3 MITSUBISHI.
Application example 3: food manufacturing machinery, semiconductor manufacturing equipment, knitting machine and embroidery machine.
High resolution encoder 131072p/rev (17 bit) MR-ECN3 MITSUBISHI.
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible wwith the wiring MR-ECN3. nothingInterface power supply: 24VDC plus or minus 10%.
Digital input: 30 points, optocoupler isolation, drain / source type support MR-ECN3 MITSUBISHI.
Digital output: 16 points, optocoupler isolation, drain / ssource type support MITSUBISHI MR-ECN3.
Analog input: 2 channels, 0 to plus or minus 10VDC (input impedance: 10~12k).
Analog output: 2 channels, 0 to plus or minus 12VDC.
Rated output: 1.0kw.
Interface: general purpose interface.
Voltage: three phase AC200V.
MITSUBISHI servo system in the MITSUBISHI servo amplifier is widely used,
It can not only be used in the high precision position control and speed control of the working machinery and general industrial machinery,
Can also be used in the field of speed control and tension control MITSUBISHI MR-ECN3 MR-ECN3
By installing a personal computer with a servo setting software, the parameters setting, trial run, state display, and gain adjustment are performed.
MITSUBISHI servo system MR-J2S column is developed on the basis of the servo MR-J2 series with a higher performance and more features of the MITSUBISHI servo system,
The control modes are position control, speed control and torque control, as well as the switching control mode among them MITSUBISHI MR-ECN3. Motor series: low inertia, low power.
Rated output power: 0.4kw.
Rated speed: 10000r/min.
Whether with brake: No.
Shaft end: Standard (straight).
Protection level: IP55 does not include the shaft part and the connector.
Features: low inertia is particularly suitable for high speed motor (6000 or 12000 RPM / min) of general industrial machinery MITSUBISHI MR-ECN3.
Application example 1: drive belt drive, robot.
Application example 2: assembly machine, sewing machine, X-Y working table MR-ECN3 MITSUBISHI.
Application example 3: food manufacturing machinery, semiconductor manufacturing equipment, knitting machine and embroidery machine.
High resolution encoder 131072p/rev (17 bit) MR-ECN3 MITSUBISHI.
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible wwith the wiring MR-ECN3. nothingInterface power supply: 24VDC plus or minus 10%.
Digital input: 30 points, optocoupler isolation, drain / source type support MR-ECN3 MITSUBISHI.
Digital output: 16 points, optocoupler isolation, drain / ssource type support MITSUBISHI MR-ECN3.
Analog input: 2 channels, 0 to plus or minus 10VDC (input impedance: 10~12k).
Analog output: 2 channels, 0 to plus or minus 12VDC.
...More relevant models >>>>
Last one: 
next one: Related download