DC power adapter PFXZCBCNDC2 Proface PFXZCBCNDC2

The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.7.5 inches, GP installed to the hard panel to provide dust and moisture proof function.Input / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor outputConverting SIO to RS-422 terminal blockGP2500S useGP3000H portable slingOne end is a loose wire, which is used to carry out RS-485 connection between the host and LT Proface PFXZCBCNDC2 PFXZCBCNDC2 The MITSUBISHI A series PLC is connected to GP, length: 5 m.Memory for extending EX GP-Pro alarm and character table functions.Connector for connecting DC power cord. (linear, 5 / set)For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface PFXZCBCNDC2. Used to install the human machine interface to the fixed panel (2 / cover).A connector that connects the DIO interface for connecting an external I/O device (5 sets).With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models Proface PFXZCBCNDC2. (2 / set)Used to prevent disconnection. (1 interface, 5 / set)Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output PFXZCBCNDC2 Proface. Up to 7 EX modules can be connected.Touch screen anti ultraviolet protective film (1 pieces).Used in a variety of host and man-machine interface for RS-422 connectionConnect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2Extension cable for connecting USB (Mini-B) interface to front panel PFXZCBCNDC2 Proface. For RGB input USB cable to prevent disconnection (2 / set)LT seal on the control panel PFXZCBCNDC2. Data transmission cable between host and LT series PFXZCBCNDC2 Proface. Length: 5 meters.Connector for connecting DC power cord (5)Used to display analog RGB (2 channels) on the GP3000Used in a variety of host and man-machhine interface for RS-232C connectionExpansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master station