Home
>> Products
>> MITSUBISHI
>> Servo driver/Servo motor
>> Servo accessories
>> MR-J3 accessories
>> Diagnostic cable MR-J3ACHECK MITSUBISHI MR-J3ACHECK
Diagnostic cable MR-J3ACHECK MITSUBISHI MR-J3ACHECK
Brand:
MITSUBISHI
Name: Diagnostic cable
Model: MR-J3ACHECK
The cable is required to diagnose the function using the MRConfigurator (servo setup software) amplifier.
...More relevant models >>>>
Name: Diagnostic cable
Model: MR-J3ACHECK
The cable is required to diagnose the function using the MRConfigurator (servo setup software) amplifier.
MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 0.6kw.
Interface type: CC-Link communication type (built-in positioning function).
Power specification: three phase AC400V.
Positioning operation by setting position and rotational speed data in the positioning table and receiving the start signal from the main controller MITSUBISHI MR-J3ACHECK.
The setting of the position and speed of the positioning table, as well as the start and stop operation can be completed through CC-Link communication MR-J3ACHECK
By using the MR-J3-D01 extension IO unit, the DI/O instruction can be used to select and locate the table.
(CC-Link can not be used for MR-J3-D01 communications).
With built-in positioning function of the servo amplifier, can be set through the CC-Link communications and speed data MITSUBISHI MR-J3ACHECK. (corresponding to the CC-Link version: Ver.1.10)
Can be achieved through the CC-Link communications to start, stop and monitoring and other operations.
Serial communication reduce wiring.
Distributed servo control system can be built by CC-Link communication.
The parameters of unit MR-PRU03 (optional) the parameter setting, operation and monitoring more convenient MITSUBISHI MR-J3ACHECK.
The servo amplifier can be used for speed control operation.
When the two stations are occupied, the speed can be set directly by the remote register. Servo motor series: low inertia, medium and large capacity MR-J3ACHECK MITSUBISHI.
Rated output: 7.0kw.
Rated speed; 3000r/min.
Electromagnetic brake: incidental.
Power supply: 200V.
Most suitable for medium and large capacity, low inertia type products in high frequency operation or acceleration and deceleration operation MR-J3ACHECK MITSUBISHI.
Improve the environmental performance of HG-SR, HG-JR series of products using IP67.
HHigh speed & high torque MR-J3ACHECK. Shorten the positioning time, achieve high-speed equipment MR-J3ACHECK MITSUBISHI.
100 scene, there are 100 different drive control.
In order to meet the needs of the diverse and detailed field,
MR-J4 product line configuration, providing a wealth of servo amplifier and servo motor products MITSUBISHI MR-J3ACHECK.
Can meet the different needs of different customers.
Rated output: 0.6kw.
Interface type: CC-Link communication type (built-in positioning function).
Power specification: three phase AC400V.
Positioning operation by setting position and rotational speed data in the positioning table and receiving the start signal from the main controller MITSUBISHI MR-J3ACHECK.
The setting of the position and speed of the positioning table, as well as the start and stop operation can be completed through CC-Link communication MR-J3ACHECK
By using the MR-J3-D01 extension IO unit, the DI/O instruction can be used to select and locate the table.
(CC-Link can not be used for MR-J3-D01 communications).
With built-in positioning function of the servo amplifier, can be set through the CC-Link communications and speed data MITSUBISHI MR-J3ACHECK. (corresponding to the CC-Link version: Ver.1.10)
Can be achieved through the CC-Link communications to start, stop and monitoring and other operations.
Serial communication reduce wiring.
Distributed servo control system can be built by CC-Link communication.
The parameters of unit MR-PRU03 (optional) the parameter setting, operation and monitoring more convenient MITSUBISHI MR-J3ACHECK.
The servo amplifier can be used for speed control operation.
When the two stations are occupied, the speed can be set directly by the remote register. Servo motor series: low inertia, medium and large capacity MR-J3ACHECK MITSUBISHI.
Rated output: 7.0kw.
Rated speed; 3000r/min.
Electromagnetic brake: incidental.
Power supply: 200V.
Most suitable for medium and large capacity, low inertia type products in high frequency operation or acceleration and deceleration operation MR-J3ACHECK MITSUBISHI.
Improve the environmental performance of HG-SR, HG-JR series of products using IP67.
HHigh speed & high torque MR-J3ACHECK. Shorten the positioning time, achieve high-speed equipment MR-J3ACHECK MITSUBISHI.
100 scene, there are 100 different drive control.
In order to meet the needs of the diverse and detailed field,
MR-J4 product line configuration, providing a wealth of servo amplifier and servo motor products MITSUBISHI MR-J3ACHECK.
Can meet the different needs of different customers.
...More relevant models >>>>
Last one: MITSUBISHI Encoder adapter set MR-J3SCNS
next one: MITSUBISHI Monitoring cable MR-J3CN6CBL1M
Related download