Home
>> Products
>> OMRON
>> Sensor
>> Proximity sensor
>> Amplifier separation / relay proximity switch
>> E2C-EM07M OMRON High Precision Positioning Inductive Proximity Sensor
E2C-EM07M OMRON High Precision Positioning Inductive Proximity Sensor
Brand:
OMRON
Name: High Precision Positioning Inductive Proximity Sensor
Model: E2C-EM07M
Type: Unshielded.
Appearance: Screw, M18 × 46.3 mm.
Sensing distance: 7 mm.
Repeat accuracy: 5 μm.
Cable specification: Standard.
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-dia. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening with,
fine positioning to maximize variations.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit.
...More relevant models >>>>
Name: High Precision Positioning Inductive Proximity Sensor
Model: E2C-EM07M
Type: Unshielded.
Appearance: Screw, M18 × 46.3 mm.
Sensing distance: 7 mm.
Repeat accuracy: 5 μm.
Cable specification: Standard.
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-dia. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening with,
fine positioning to maximize variations.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit.
Classification: Stationary Unit.
Appearance: M30. 8±1.5 mm, Stationary Unit, Moving Unit.
Transmission distance (couplers): Typical: 19.2 ms, Max: 31 ms.
I/O transmission delay time:
Transmits Input Device ON/OFF.
Signals and Power.
The Key to Effortless Wiring for.
Rotating and Moving Bodies E2C-EM07M OMRON. E32-D22R type: standard type; soft (new standard),
Features: with 3 cylinder (small),
Bending radius (mm): R; R1 E2C-EM07M
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsHigh performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: none.
Shape: non shield, M18 E2C-EM07M OMRON.
Detection range: 14mm.
Action mode: NC. Appearance: Integrated type.
Optical system: Through-beam.
Measuring width: 28mm.
Sensing distance: 40mm.
Resolution: 10µm.
Output type: PNP.
Measurable at any position.
The usual limitations, such as the ''measurement,
area being confined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome E2C-EM07M OMRON. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at or whichever way it is inserted.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area. Power supply voltage: 12 to 24 VDC.
Output configuration: NPN open collector.
Output code: BCD.
Resolution (divisions): 360.
Connection method: Pre-wired Connector Model (2 m) .
Rugged Rotary Encoder.
Absolute model.
External diameter of 60 mm.
Resolution of up to 1,024 (10-bit).
IP65 oil-proof protection.
Strong shaft.
Radial: 120 N, Thrust: 50 N. Size: M8(Stainless steel)(See note 2.); Double; Unshielded.
Sensing distance: 4 mm.
Connecting method (See note 1.): Pre-wired.
Body length: Short.
Output configuration: PNP.
Operation mode NO.
A new generation in global applications. Size: M30 (brass), single distance, non shield type.
Detection distance: 20mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: PNP.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to pprice ratio E2C-EM07M.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
Thhe oil spray test was carried out on the condition of the work site E2C-EM07M.
Simulation test was carried out in the environment of high oil mist concentration.
Appearance: M30. 8±1.5 mm, Stationary Unit, Moving Unit.
Transmission distance (couplers): Typical: 19.2 ms, Max: 31 ms.
I/O transmission delay time:
Transmits Input Device ON/OFF.
Signals and Power.
The Key to Effortless Wiring for.
Rotating and Moving Bodies E2C-EM07M OMRON. E32-D22R type: standard type; soft (new standard),
Features: with 3 cylinder (small),
Bending radius (mm): R; R1 E2C-EM07M
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsHigh performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: none.
Shape: non shield, M18 E2C-EM07M OMRON.
Detection range: 14mm.
Action mode: NC. Appearance: Integrated type.
Optical system: Through-beam.
Measuring width: 28mm.
Sensing distance: 40mm.
Resolution: 10µm.
Output type: PNP.
Measurable at any position.
The usual limitations, such as the ''measurement,
area being confined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome E2C-EM07M OMRON. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at or whichever way it is inserted.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area. Power supply voltage: 12 to 24 VDC.
Output configuration: NPN open collector.
Output code: BCD.
Resolution (divisions): 360.
Connection method: Pre-wired Connector Model (2 m) .
Rugged Rotary Encoder.
Absolute model.
External diameter of 60 mm.
Resolution of up to 1,024 (10-bit).
IP65 oil-proof protection.
Strong shaft.
Radial: 120 N, Thrust: 50 N. Size: M8(Stainless steel)(See note 2.); Double; Unshielded.
Sensing distance: 4 mm.
Connecting method (See note 1.): Pre-wired.
Body length: Short.
Output configuration: PNP.
Operation mode NO.
A new generation in global applications. Size: M30 (brass), single distance, non shield type.
Detection distance: 20mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: PNP.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to pprice ratio E2C-EM07M.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
Thhe oil spray test was carried out on the condition of the work site E2C-EM07M.
Simulation test was carried out in the environment of high oil mist concentration.
...More relevant models >>>>
Last one: OMRON High Precision Positioning Inductive Proximity Sensor E2C-EV05-S
next one: OMRON High Precision Positioning Inductive Proximity Sensor E2C-EM07M-F
Related download