Home
>> Products
>> OMRON
>> Sensor
>> Proximity sensor
>> Cylindrical proximity sensor
>> E2E2-X7D1 | OMRON E2E2-X7D1 Long-barrel Inductive Proximity Sensor
E2E2-X7D1 | OMRON E2E2-X7D1 Long-barrel Inductive Proximity Sensor
Brand:
OMRON
Name: Long-barrel Inductive Proximity Sensor
Model: E2E2-X7D1
Appearance: Shielded, M18.
Sensing distance: 7 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.
...More relevant models >>>>
Name: Long-barrel Inductive Proximity Sensor
Model: E2E2-X7D1
Appearance: Shielded, M18.
Sensing distance: 7 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.
Determine the vibration of equipment and machinery.
With the aid of vibration level can be easily recognized, set the ON/OFF output.
Confirm vibration waveform by AC monitor output.
Sensor part of the use of IP67 protection structure, can also be used in harsh environments.
Can switch acceleration, speed (linear output type) OMRON E2E2-X7D1.
Using 5 processing modes to determine the abnormal state of high accuracy (manual setting) E2E2-X7D1
Ontology: part of the controller.
Category: linear output. Size: M12 (Brass); Single; Unshielded.
Sensing distance: 20 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Short.
Output configuration: NPN.
Operation mode NO.
A new generation in global applications OMRON E2E2-X7D1. Appearance: Unshielded, M30.
Sensing distance: 30 mm.
Model: NO.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature. Appearance: Unshielded.
Sensing surface: Top.
Sensing distance: 1 OMRON E2E2-X7D1. 6 mm.
Output configuration: PNP.
Model: Operation mode, NC.
Advanced Performance and Wide.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Amplifier.
Maximum sensing distance: 2 E2E2-X7D1 OMRON. 5 mm. Stable detection even with,
workpiece fluctuations.
Response frequency: 1 kHz.
Low current consumption. Appearance: M8.
Sensing distance: 2 mm.
Connection method: Pre-wired Models (2 m) E2E2-X7D1 OMRON.
Cable specifications: PVC (oil-resistant).
Operation mode : NC .
Pin arrangement: --.
Applicable connector code: --.
Model: NPN output.
Your Search for Proximity Sensors.
Starts with the World-leading.
Performance and Quality of the E2E.
Standard Sensors for detecting ferrous metals E2E2-X7D1 OMRON.
Widde array of variations E2E2-X7D1. Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference.
Superior environment resistance with standard cable made of oil,
resistant PVC annd sensing surface made of material that resists,
cutting oil OMRON E2E2-X7D1.
Useful to help prevent disconnection.
Cable protector provided as a standard feature.
With the aid of vibration level can be easily recognized, set the ON/OFF output.
Confirm vibration waveform by AC monitor output.
Sensor part of the use of IP67 protection structure, can also be used in harsh environments.
Can switch acceleration, speed (linear output type) OMRON E2E2-X7D1.
Using 5 processing modes to determine the abnormal state of high accuracy (manual setting) E2E2-X7D1
Ontology: part of the controller.
Category: linear output. Size: M12 (Brass); Single; Unshielded.
Sensing distance: 20 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Short.
Output configuration: NPN.
Operation mode NO.
A new generation in global applications OMRON E2E2-X7D1. Appearance: Unshielded, M30.
Sensing distance: 30 mm.
Model: NO.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature. Appearance: Unshielded.
Sensing surface: Top.
Sensing distance: 1 OMRON E2E2-X7D1. 6 mm.
Output configuration: PNP.
Model: Operation mode, NC.
Advanced Performance and Wide.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Amplifier.
Maximum sensing distance: 2 E2E2-X7D1 OMRON. 5 mm. Stable detection even with,
workpiece fluctuations.
Response frequency: 1 kHz.
Low current consumption. Appearance: M8.
Sensing distance: 2 mm.
Connection method: Pre-wired Models (2 m) E2E2-X7D1 OMRON.
Cable specifications: PVC (oil-resistant).
Operation mode : NC .
Pin arrangement: --.
Applicable connector code: --.
Model: NPN output.
Your Search for Proximity Sensors.
Starts with the World-leading.
Performance and Quality of the E2E.
Standard Sensors for detecting ferrous metals E2E2-X7D1 OMRON.
Widde array of variations E2E2-X7D1. Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference.
Superior environment resistance with standard cable made of oil,
resistant PVC annd sensing surface made of material that resists,
cutting oil OMRON E2E2-X7D1.
Useful to help prevent disconnection.
Cable protector provided as a standard feature.
...More relevant models >>>>
Last one: OMRON Long-barrel Inductive Proximity Sensor E2E2-X3D1
next one: OMRON Long-barrel Inductive Proximity Sensor E2E2-X10D1
Related download