Home
>> Products
>> OMRON
>> Sensor
>> Proximity sensor
>> Cylindrical proximity sensor
>> E2G-M30KN18-M1-C1 Cylindrical proximity sensor OMRON E2G-M30KN18-M1-C1
E2G-M30KN18-M1-C1 Cylindrical proximity sensor OMRON E2G-M30KN18-M1-C1
Brand:
OMRON
Name: Cylindrical proximity sensor
Model: E2G-M30KN18-M1-C1
High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type.
Shape: non shield, M30.
Detection range: 18mm.
Output configuration: NPN.
Action mode: NO.
...More relevant models >>>>
Name: Cylindrical proximity sensor
Model: E2G-M30KN18-M1-C1
High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type.
Shape: non shield, M30.
Detection range: 18mm.
Output configuration: NPN.
Action mode: NO.
Sensor type: Transparent detected with P-opaquing function.
Sensing distance: 100 to 500 mm with E39-RP1.
Connection method: M12 connector.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered OMRON E2G-M30KN18-M1-C1.
A wide variety of models.
Models designed for special applications E2G-M30KN18-M1-C1
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing. CompoNet sensor communication unit, simplify sensor settings and management.
No program can be transmitted to the ON/OFF signal PLC (CompoNet communication from the station function).
Support setting content to the detection threshold, quantity and function of reading, writing and teaching operation (explicit message function) OMRON E2G-M30KN18-M1-C1.
The assembly is simple, just use the communication cable to connect the E3X-CRT and the amplifier next to it.
Up to 16 sensor amplifiers can be connected. Size: M8, Non-shielded.
Sensing distance: 4.0 mm.
Connection: M8 connector (3-pin).
Body material: Stainless steel OMRON E2G-M30KN18-M1-C1.
Thread length (overall length): 49 (61).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor E2G-M30KN18-M1-C1 OMRON.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels) E2G-M30KN18-M1-C1 OMRON.
Modular construction simplifies customization. Size: M12 (brass), single distance, shielding type.
Detection range: 2mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: PNP.
Action mode NC.
Set up the new standard of the world economy proximity sensor E2G-M30KN18-M1-C1 OMRON.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio.
Thhis series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor E2G-M30KN18-M1-C1.
We have tested the product not only on the protection level (IP67) specific item,
Thhe oil spray test was carried out on the condition of the work site OMRON E2G-M30KN18-M1-C1.
Simulation test was carried out in the environment of high oil mist concentration.
Sensing distance: 100 to 500 mm with E39-RP1.
Connection method: M12 connector.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered OMRON E2G-M30KN18-M1-C1.
A wide variety of models.
Models designed for special applications E2G-M30KN18-M1-C1
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing. CompoNet sensor communication unit, simplify sensor settings and management.
No program can be transmitted to the ON/OFF signal PLC (CompoNet communication from the station function).
Support setting content to the detection threshold, quantity and function of reading, writing and teaching operation (explicit message function) OMRON E2G-M30KN18-M1-C1.
The assembly is simple, just use the communication cable to connect the E3X-CRT and the amplifier next to it.
Up to 16 sensor amplifiers can be connected. Size: M8, Non-shielded.
Sensing distance: 4.0 mm.
Connection: M8 connector (3-pin).
Body material: Stainless steel OMRON E2G-M30KN18-M1-C1.
Thread length (overall length): 49 (61).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor E2G-M30KN18-M1-C1 OMRON.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels) E2G-M30KN18-M1-C1 OMRON.
Modular construction simplifies customization. Size: M12 (brass), single distance, shielding type.
Detection range: 2mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: PNP.
Action mode NC.
Set up the new standard of the world economy proximity sensor E2G-M30KN18-M1-C1 OMRON.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio.
Thhis series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor E2G-M30KN18-M1-C1.
We have tested the product not only on the protection level (IP67) specific item,
Thhe oil spray test was carried out on the condition of the work site OMRON E2G-M30KN18-M1-C1.
Simulation test was carried out in the environment of high oil mist concentration.
...More relevant models >>>>
Last one: OMRON Cylindrical proximity sensor E2G-M18KN10-M1-B1
next one: OMRON Cylindrical proximity sensor E2G-M30KN18-M1-B1
Related download