Home
>> Products
>> OMRON
>> Sensor
>> Photoelectric sensor
>> Photoelectric sensor peripheral equipment
>> E39-L142 Mounting Brackets OMRON E39-L142
E39-L142 Mounting Brackets OMRON E39-L142
Brand:
OMRON
Name: Mounting Brackets
Model: E39-L142
Fitting materials: Stainless steel (SUS304).
Count: 1 .
Accessories: Description,Slotted/Phillips screws M3 × 8,
(with spring and plain washers);
Material, Stainless steel (SUS304);
Count, 2 .
Applicable sensor (mounting pitch on sensor side): E3Z pre-wired model.
Page: Dimensions, 13.
...More relevant models >>>>
Name: Mounting Brackets
Model: E39-L142
Fitting materials: Stainless steel (SUS304).
Count: 1 .
Accessories: Description,Slotted/Phillips screws M3 × 8,
(with spring and plain washers);
Material, Stainless steel (SUS304);
Count, 2 .
Applicable sensor (mounting pitch on sensor side): E3Z pre-wired model.
Page: Dimensions, 13.
Connection method: Pre-wired.
Cable length: 5 m.
Sensing distance: 300 ± 150 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications OMRON E39-L142.
Long-distance model for up to 1,000 mm E39-L142 Size: Shielded, M12.
Sensing distance: 2 mm.
Output: No polarity Pin allocations: 3-4.
Operation mode: NO.
Highly Durable Proximity Sensor for.
Tough Environments.
Completely stainless-steel housing.
Aluminum chip immunity.
Embedding installation to metal (steel) fittings.
Chemical resistance certified by Ecolab Europe OMRON E39-L142.
Lineup includes pre-wire models and DC 3-wire NPN output,
models with fluororesin coating. Sensing method: Through-beam type (with slot).
Sensing distance: 5 mm (slot width).
Output type: NPN output.
Output configuration: Light-ON.
Photomicrosensor with light,
modulation for reduced external,
light interference and a,
connector for easy maintenance.
Built-in connectors OMRON E39-L142.
Select from four easy-to-use shapes for efficient space,
utilization.
Connectors with locks for safety against vibration.
Convenient mounting method using M3 screws.
Wide operating voltage range: 5 to 24 VDC E39-L142 OMRON. Power supply voltage: AC/DC power supply selectable type.
Sensing method: Diffuse-reflective.
Sensing distance: 2.5 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor E39-L142 OMRON.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.)) E39-L142.
Improved visibility:
A red LED that makes the spot visible E39-L142 OMRON.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectaable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON E39-L142.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
Cable length: 5 m.
Sensing distance: 300 ± 150 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications OMRON E39-L142.
Long-distance model for up to 1,000 mm E39-L142 Size: Shielded, M12.
Sensing distance: 2 mm.
Output: No polarity Pin allocations: 3-4.
Operation mode: NO.
Highly Durable Proximity Sensor for.
Tough Environments.
Completely stainless-steel housing.
Aluminum chip immunity.
Embedding installation to metal (steel) fittings.
Chemical resistance certified by Ecolab Europe OMRON E39-L142.
Lineup includes pre-wire models and DC 3-wire NPN output,
models with fluororesin coating. Sensing method: Through-beam type (with slot).
Sensing distance: 5 mm (slot width).
Output type: NPN output.
Output configuration: Light-ON.
Photomicrosensor with light,
modulation for reduced external,
light interference and a,
connector for easy maintenance.
Built-in connectors OMRON E39-L142.
Select from four easy-to-use shapes for efficient space,
utilization.
Connectors with locks for safety against vibration.
Convenient mounting method using M3 screws.
Wide operating voltage range: 5 to 24 VDC E39-L142 OMRON. Power supply voltage: AC/DC power supply selectable type.
Sensing method: Diffuse-reflective.
Sensing distance: 2.5 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor E39-L142 OMRON.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.)) E39-L142.
Improved visibility:
A red LED that makes the spot visible E39-L142 OMRON.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectaable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON E39-L142.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
...More relevant models >>>>
Last one: 
next one: Related download