Home
>> Products
>> OMRON
>> Sensor
>> Photoelectric sensor
>> photoelectric sensor amplifier separation type
>> E3C-VS1G OMRON Small Spot/Mark
E3C-VS1G OMRON Small Spot/Mark
Brand:
OMRON
Name: Small Spot/Mark
Model: E3C-VS1G
Sensing method: Reflective model(for mark detection).
Connection method: Pre-wired (2 m).
Sensing distance: 10±2 mm.
Extremely thin beam ideal for detection of minute objects and marks.
Ideal for detection of small objects and slight color differences.
Bad mark detection.
Detection of thin wire of 200 μ.
Detection of slight level differences.
...More relevant models >>>>
Name: Small Spot/Mark
Model: E3C-VS1G
Sensing method: Reflective model(for mark detection).
Connection method: Pre-wired (2 m).
Sensing distance: 10±2 mm.
Extremely thin beam ideal for detection of minute objects and marks.
Ideal for detection of small objects and slight color differences.
Bad mark detection.
Detection of thin wire of 200 μ.
Detection of slight level differences.
Number of connections to the image machine: 4.
Image storage function: up to 35 images can be stored.
Memory card slot: 2.
Monitor interface: composite video output: 1 channels. S video output: 1 channels.
Ethernet: 10 BASE-T:1 channels.
Parallel I/O:21 inputs and 46 outputs. E32-T16J type: special beam type; region detection,
Specialty: width 11mm side,
Shape / detection distance (mm): 1300; 1000; 650 (260),
Bending radius (mm): R10 E3C-VS1G OMRON E3C-VS1G
Standard test object (minimum test object) (mm) 1: (0.2) 3,
Fiber element for meeting diversified needsSensing method: Narrow-beam reflective.
Connection method: Connector (M8, 4pins).
Sensing distance: 90±30 mm.
Model: PNP output.
Small 2.5-mm-diameter Spot Ideal for E3C-VS1G OMRON.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spot of light enables visual checking of sensing,
spot position.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance. Cable length: 20 m.
A CMOS Laser Sensor That’s E3C-VS1G OMRON.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Free change detection direction.
Detection direction can be according to the front, side (up and down, around 90 units) change.
Can be similar to the feeling of a limit switch installation.
Type: DC type.
Shape: non shield.
Detection range: 30mm.
Output form: NO NPN + NC (dual output). High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / wire type E3C-VS1G.
Shape: shield, M12.
Detection range: 2mm.
Output configuration: PNP.
Action mode: NC. Appearance: Shielded, M12.
Sensing distance: 2 mm.
Output configuration : DC 2-wire.
Operation mode: NO.
Inductive Profoximity Senssor with E3C-VS1G.
Chemical-resistant Fluororesin Case.
Housing and mounting are made of Fluororesin resistant to chemicals.
Maximum sensing distance: 10 mm.
Image storage function: up to 35 images can be stored.
Memory card slot: 2.
Monitor interface: composite video output: 1 channels. S video output: 1 channels.
Ethernet: 10 BASE-T:1 channels.
Parallel I/O:21 inputs and 46 outputs. E32-T16J type: special beam type; region detection,
Specialty: width 11mm side,
Shape / detection distance (mm): 1300; 1000; 650 (260),
Bending radius (mm): R10 E3C-VS1G OMRON E3C-VS1G
Standard test object (minimum test object) (mm) 1: (0.2) 3,
Fiber element for meeting diversified needsSensing method: Narrow-beam reflective.
Connection method: Connector (M8, 4pins).
Sensing distance: 90±30 mm.
Model: PNP output.
Small 2.5-mm-diameter Spot Ideal for E3C-VS1G OMRON.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spot of light enables visual checking of sensing,
spot position.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance. Cable length: 20 m.
A CMOS Laser Sensor That’s E3C-VS1G OMRON.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Free change detection direction.
Detection direction can be according to the front, side (up and down, around 90 units) change.
Can be similar to the feeling of a limit switch installation.
Type: DC type.
Shape: non shield.
Detection range: 30mm.
Output form: NO NPN + NC (dual output). High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / wire type E3C-VS1G.
Shape: shield, M12.
Detection range: 2mm.
Output configuration: PNP.
Action mode: NC. Appearance: Shielded, M12.
Sensing distance: 2 mm.
Output configuration : DC 2-wire.
Operation mode: NO.
Inductive Profoximity Senssor with E3C-VS1G.
Chemical-resistant Fluororesin Case.
Housing and mounting are made of Fluororesin resistant to chemicals.
Maximum sensing distance: 10 mm.
...More relevant models >>>>
Last one: OMRON Small Spot/Mark E3C-VS Series/E3C-VM Series
next one: OMRON Small Spot/Mark E3C-VS3R
Related download