Home
>> Products
>> OMRON
>> Sensor
>> Photoelectric sensor
>> Photoelectric sensor power built-in type
>> E3JK-RN11 2M OMRON Built-in Power Supply Photoelectric Sensor
E3JK-RN11 2M OMRON Built-in Power Supply Photoelectric Sensor
Brand:
OMRON
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-RN11 2M
Power supply voltage: DC.
Sensing method: Retro-reflective without MSR function.
Sensing distance: 7 m[100 mm](When using E39-R1).
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
...More relevant models >>>>
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-RN11 2M
Power supply voltage: DC.
Sensing method: Retro-reflective without MSR function.
Sensing distance: 7 m[100 mm](When using E39-R1).
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
Appearance: Shielded, M12.
Sensing distance: 4 mm.
Output configuration: DC 2-wire (without polarity) (3)-(4) pin arrangement.
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior spatter resistance.
Long Sensing-distance Models added for sensing,
distances up to 15 mm E3JK-RN11 2M OMRON.
Pre-wired Smartclick Connector Models are also available. High performance price ratio standard type proximity sensor E3JK-RN11 2M
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / wire type.
Shape: shield, M12.
Detection range: 2mm.
Output configuration: PNP.
Action mode: NC. Field of view: Wide View (Long-distance).
Number of pixels: 350,000 pixels E3JK-RN11 2M OMRON.
Monochrome: NPN.
Field of view/Installation distance: Refer to figure 3 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series E3JK-RN11 2M OMRON. Nozzle gap.
Optical system: positive and negative radiation.
Detection distance: 10 positive and negative 0.5mm.
Beam shape: linear beam.
Beam diameter: 900mm * 25 M.
Resolution: 0.25 M.
Cable length: 0.5m. Detection methods: on the radio type (projector + optical device).
Connection: socket type (M12).
Detection distance: infrared 20m.
Output mode: PNP output.
Optical projector: 2M E3Z-FTP22-L.
Optical device: 2M E3Z-FTP22-D. E32-A01 type: special beam type; liquid level detection,
Specialty: when there is liquid into the light, not susceptible to the eeffects of bubbles and water droplets,
Bending radius (mm): R4 E3JK-RN11 2M.
Fiber element for meeting diversified needsFitting materials: Iron, zinc plating.
Count: 2.
Accessories: Description, Phillips screws M3 × 10 Nuts M3;
Material, Iron, ziinc plating Iron, zinc plating;
Count, 4, 4 E3JK-RN11 2M.
Applicable sensor (mounting pitch on sensor side): E32-T16P (19)E32-T16PR (19).
Page: Dimensions, 10.
Sensing distance: 4 mm.
Output configuration: DC 2-wire (without polarity) (3)-(4) pin arrangement.
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior spatter resistance.
Long Sensing-distance Models added for sensing,
distances up to 15 mm E3JK-RN11 2M OMRON.
Pre-wired Smartclick Connector Models are also available. High performance price ratio standard type proximity sensor E3JK-RN11 2M
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / wire type.
Shape: shield, M12.
Detection range: 2mm.
Output configuration: PNP.
Action mode: NC. Field of view: Wide View (Long-distance).
Number of pixels: 350,000 pixels E3JK-RN11 2M OMRON.
Monochrome: NPN.
Field of view/Installation distance: Refer to figure 3 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series E3JK-RN11 2M OMRON. Nozzle gap.
Optical system: positive and negative radiation.
Detection distance: 10 positive and negative 0.5mm.
Beam shape: linear beam.
Beam diameter: 900mm * 25 M.
Resolution: 0.25 M.
Cable length: 0.5m. Detection methods: on the radio type (projector + optical device).
Connection: socket type (M12).
Detection distance: infrared 20m.
Output mode: PNP output.
Optical projector: 2M E3Z-FTP22-L.
Optical device: 2M E3Z-FTP22-D. E32-A01 type: special beam type; liquid level detection,
Specialty: when there is liquid into the light, not susceptible to the eeffects of bubbles and water droplets,
Bending radius (mm): R4 E3JK-RN11 2M.
Fiber element for meeting diversified needsFitting materials: Iron, zinc plating.
Count: 2.
Accessories: Description, Phillips screws M3 × 10 Nuts M3;
Material, Iron, ziinc plating Iron, zinc plating;
Count, 4, 4 E3JK-RN11 2M.
Applicable sensor (mounting pitch on sensor side): E32-T16P (19)E32-T16PR (19).
Page: Dimensions, 10.
...More relevant models >>>>
Last one: OMRON Built-in Power Supply Photoelectric Sensor E3JK-TP14 2M
next one: OMRON Built-in Power Supply Photoelectric Sensor E3JK-RP11 2M
Related download