Appearance: Close mounting.
Sensing method: Throughbeam type(with slot).
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable).
Indicator mode: No incident light.
Model: NPN output.
Global Standard Slot-type.
100-mA direct switching capacity.
dark-ON and light-ON operation.
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
operation are also available.
A wide range of variations in eight different shapes.
Flexible robot cable is provided as a standard feature.
Name: Laser Reflectors, Standard.
Ambient operating temperature range: -10 to 55°C (No icing).
Ambient storage temperature range: -25 to 70°C (No icing).
Ambient operating humidity range: 35 to 85% (No condensation).
Ambient storage humidity range: 35 to 85% (No condensation). Mounting method.
Hook the upper protruding portion,
of the Slit to the upper indented,
mounting portion of the Sensor,
and adjust the position of the Slit,
so that the Slit will be in parallel to,
the lens side of the Sensor EE-SX673A OMRON
EE-SX673A
Press the lower protruding portion,
of the Slit onto the indented,
mounting portion of the Sensor,
until the Slit snaps in. Connection method: Pre-wired.
Cable length: 5 m.
Sensing distance: 600 ± 400 mm EE-SX673A OMRON.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Ultra small rotary encoder (diameter 20) - absolute.
Machine built in super small EE-SX673A OMRON.
The diameter of 20mm size, resolution 256 (8bit).
Axle and hollow shaft type.
Power supply voltage: DC5V.
Output form: NPN open collector output.
Resolution (segmentation):256.
Axis shape: hollow shaft. Determine the vibration of equipment and machinery.
With the aid of vibration level can be easily recognized, set the ON/OFF output.
Confirm vibration waveform by AC monitor output.
Sensor part of the use of IP67 protection structure, can also be used in harsh environments.
Can switch acceleration, speed (linear output type).
Using 5 processing modess to determine the abnormal state of high accuracy (manual setting) EE-SX673A.
Ontology: part of the controller.
Category: linear output. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire tyype EE-SX673A.
Non polar proximity sensor.
Type: DC three wire / wire type.
Shape: shield, M12.
Detection range: 2mm.
Output configuration: NPN.
Action mode: NO.