Home
>> Products
>> OMRON
>> Relay
>> General relay
>> Relay for control cabinet
>> G2A-434A | OMRON Power Relay G2A-434A
G2A-434A | OMRON Power Relay G2A-434A
Brand:
OMRON
Name: Power Relay
Model: G2A-434A
Contact form: 4PDT.
Classification: Standard model.
Plug-in terminals.
Fully Sealed Version of G2A that Displays Its.
Power in Adverse Environments.
Exhibits stable performance in an adverse atmosphere of,
harmful gas, moisture, or powdery dust due to its hermetically,
sealed construction.
All the mechanical components of the Relay have been,
annealed to prevent gas generation inside the Relay.
Economical as compared with a hermetically sealed relay in a,
metallic enclosure.
...More relevant models >>>>
Name: Power Relay
Model: G2A-434A
Contact form: 4PDT.
Classification: Standard model.
Plug-in terminals.
Fully Sealed Version of G2A that Displays Its.
Power in Adverse Environments.
Exhibits stable performance in an adverse atmosphere of,
harmful gas, moisture, or powdery dust due to its hermetically,
sealed construction.
All the mechanical components of the Relay have been,
annealed to prevent gas generation inside the Relay.
Economical as compared with a hermetically sealed relay in a,
metallic enclosure.
Terminal (Wire connection): Push-In Plus Terminal.
Classification: Microloads.
Latching lever (Test switch): No.
Rated input voltage: AC/DC, 48V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel OMRON G2A-434A.
Realized opening and closing ability with one pole 6 A slim shape G2A-434A
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs OMRON G2A-434A.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Easy-to-use, Space-saving Terminal Relay with Four-point Output.
Almost the same size as PYF Socket: 31 x 35 x 68 mm (W x H x D).
Each terminal circuit (with coil or contact) is independent from one another.
Short Bar ensures easy connection of common and adjacent terminals OMRON G2A-434A.
Provided with a terminal cover that prevents electric-shock ac cidents.
Relay and MOS FET relay models are available.
LED operation indicator.
Built-in diode absorbs coil surge.
Mounts either on DIN track or screws G2A-434A OMRON.
Tool for easy mounting or removal of Relays provided.
UL, CSA, and VDE certification for standard models (VDE: G6D-F4B only). Isolation: Phototriac coupler G2A-434A OMRON.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 60 A at 24 to 240 VAC.
Rated input voltage: 5 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimum design of heat sink.
Mountiing possible via screws or via DIN track G2A-434A.
Close mounting possible for linking terminals G2A-434A OMRON.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply witth VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load OMRON G2A-434A.
Certified by UL, CSA, and VDE (reinforced insulation).
Classification: Microloads.
Latching lever (Test switch): No.
Rated input voltage: AC/DC, 48V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel OMRON G2A-434A.
Realized opening and closing ability with one pole 6 A slim shape G2A-434A
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs OMRON G2A-434A.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Easy-to-use, Space-saving Terminal Relay with Four-point Output.
Almost the same size as PYF Socket: 31 x 35 x 68 mm (W x H x D).
Each terminal circuit (with coil or contact) is independent from one another.
Short Bar ensures easy connection of common and adjacent terminals OMRON G2A-434A.
Provided with a terminal cover that prevents electric-shock ac cidents.
Relay and MOS FET relay models are available.
LED operation indicator.
Built-in diode absorbs coil surge.
Mounts either on DIN track or screws G2A-434A OMRON.
Tool for easy mounting or removal of Relays provided.
UL, CSA, and VDE certification for standard models (VDE: G6D-F4B only). Isolation: Phototriac coupler G2A-434A OMRON.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 60 A at 24 to 240 VAC.
Rated input voltage: 5 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimum design of heat sink.
Mountiing possible via screws or via DIN track G2A-434A.
Close mounting possible for linking terminals G2A-434A OMRON.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply witth VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load OMRON G2A-434A.
Certified by UL, CSA, and VDE (reinforced insulation).
...More relevant models >>>>
Last one: 
next one: Related download