Home
>> Products
>> OMRON
>> Relay
>> Power regulator
>> G3PW-A260EU-S | OMRON Single-phase Power Controller G3PW-A260EU-S
G3PW-A260EU-S | OMRON Single-phase Power Controller G3PW-A260EU-S
Brand:
OMRON
Name: Single-phase Power Controller
Model: G3PW-A260EU-S
Control terminal block: Terminal block with small slotted screws.
Type: Standard.
Capacity: 60 A, 100 to 240 VAC.
Heater burnout detection: No.
Communications: No.
High-precision Control with Easy Setup,
Precise heater burnout detection.
Set value and present value monitoring with indicators.
Phase control or optimum cycle control.
RS-485 communications to set manipulated variables and,
monitor load current.
Total run time monitoring.
Output modes for phase control: proportional to phase angle,
proportional to voltage, proportional to square voltage,
and constant-current control.
Application with various loads: constant load resistance,
variable load resistance.
UL, and IEC/EN (TÜV) certified.
...More relevant models >>>>
Name: Single-phase Power Controller
Model: G3PW-A260EU-S
Control terminal block: Terminal block with small slotted screws.
Type: Standard.
Capacity: 60 A, 100 to 240 VAC.
Heater burnout detection: No.
Communications: No.
High-precision Control with Easy Setup,
Precise heater burnout detection.
Set value and present value monitoring with indicators.
Phase control or optimum cycle control.
RS-485 communications to set manipulated variables and,
monitor load current.
Total run time monitoring.
Output modes for phase control: proportional to phase angle,
proportional to voltage, proportional to square voltage,
and constant-current control.
Application with various loads: constant load resistance,
variable load resistance.
UL, and IEC/EN (TÜV) certified.
Compact Terminal SSR with 4 Outputs.
Easy-to-use SSR block that combines four compact G3S SSRs,
sockets, and heat sink in one unit.
Easy wiring with separate I/O terminal construction.
LED operation indicator.
Special socket used for easy Relay replacement.
Mounts either on DIN track or with screws OMRON G3PW-A260EU-S. Terminal (wire connection): Screw terminal.
Applicable output load: AC load G3PW-A260EU-S
Zero cross function: No.
Rated input voltage: AC 230V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals OMRON G3PW-A260EU-S.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs OMRON G3PW-A260EU-S.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. The main body: with shell type / socket terminal type.
Classification: internal connection special type (contact Ag) G3PW-A260EU-S OMRON.
Pole number: 3 pole.
A variety of eight pin pin type electric power.
With shell models have AC4 rated specifications (50/60Hz AC200/220V, 50/60Hz AC100/110V) G3PW-A260EU-S OMRON.
Installation, wiring convenient, easy to operate.
Has more than 5 million mechanical life, durable.
Standard type, with shell type, special contact specifications, double contact type, double coil latch type, etc., the product is complete. Standard certification: No G3PW-A260EU-S OMRON.
Action indicator: there.
Applicable load of output: AC100 2A ~ 240V.
Input rated voltage: AC200//220V G3PW-A260EU-S.
Insulation: photo coupler.
Zero crossing trigger function.
And the MY type of the same shape of the G3F series of new international standard certification (-VD type).
Achieved UL, CSA, EN (VDE certification) standard ccertification OMRON G3PW-A260EU-S. (type -VD)
Socket terminal type of same size with MY (2 pole type).
A model with an action indicator to check the status of the input.
Easy-to-use SSR block that combines four compact G3S SSRs,
sockets, and heat sink in one unit.
Easy wiring with separate I/O terminal construction.
LED operation indicator.
Special socket used for easy Relay replacement.
Mounts either on DIN track or with screws OMRON G3PW-A260EU-S. Terminal (wire connection): Screw terminal.
Applicable output load: AC load G3PW-A260EU-S
Zero cross function: No.
Rated input voltage: AC 230V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals OMRON G3PW-A260EU-S.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs OMRON G3PW-A260EU-S.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. The main body: with shell type / socket terminal type.
Classification: internal connection special type (contact Ag) G3PW-A260EU-S OMRON.
Pole number: 3 pole.
A variety of eight pin pin type electric power.
With shell models have AC4 rated specifications (50/60Hz AC200/220V, 50/60Hz AC100/110V) G3PW-A260EU-S OMRON.
Installation, wiring convenient, easy to operate.
Has more than 5 million mechanical life, durable.
Standard type, with shell type, special contact specifications, double contact type, double coil latch type, etc., the product is complete. Standard certification: No G3PW-A260EU-S OMRON.
Action indicator: there.
Applicable load of output: AC100 2A ~ 240V.
Input rated voltage: AC200//220V G3PW-A260EU-S.
Insulation: photo coupler.
Zero crossing trigger function.
And the MY type of the same shape of the G3F series of new international standard certification (-VD type).
Achieved UL, CSA, EN (VDE certification) standard ccertification OMRON G3PW-A260EU-S. (type -VD)
Socket terminal type of same size with MY (2 pole type).
A model with an action indicator to check the status of the input.
...More relevant models >>>>
Last one: OMRON Single-phase Power Controller G3PW-A245EU-S
next one: OMRON Single-phase Power Controller G3PW-A220EC-S-FLK
Related download