GP37W2-DF00 Proface Screen protection film

Disposable battery (1 blocks) for backing up clock data.AUX connector for external output (5 / set).For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)For the elastic display module installation nut wrench (1 / set).Memory for extending EX GP-Pro alarm and character table functions GP37W2-DF00 Proface. 5.7 inches, replace the backlight (1 / set)I/O module, including 32 point NPN/PNP inputDirect interface Matsushita Electric PLC FP series CPU port GP37W2-DF00The PC adapter for PCMCIA slot read CF card required.Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) GP37W2-DF00 Proface. USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).Suitable for LT4000M/GP4000M series modules, 3.5 inch.Portable GP2000H series models accessories, RS-232 single head cable (3 m).Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block GP37W2-DF00 Proface. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.3.4 Inch Touch Screen anti UV protective film (1 pieces).Disposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / sets)10.4 inch TFT models applicable paarts, for the 10 GP37W2-DF00. 4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.COM2 terminal adapter for communication through the RS-422/485 connectionConnect to PC, transfer screen ddata and user programs GP37W2-DF00. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.