Home
>> Products
>> MITSUBISHI
>> Touch Screen
>> GOT1000 series touch screen
>> GT15 touch screen
>> GT1575V-STBD | MITSUBISHI 10.4 inch touch screen GT1575V-STBD
GT1575V-STBD | MITSUBISHI 10.4 inch touch screen GT1575V-STBD
Brand:
MITSUBISHI
Name: 10.4 inch touch screen
Model: GT1575V-STBD
A series of high performance models that are widely used in network or single machine work environments.
Screen size: 10.4 inches.
Display color: 256 color or more color.
Installation type: compatible with video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly.
...More relevant models >>>>
Name: 10.4 inch touch screen
Model: GT1575V-STBD
A series of high performance models that are widely used in network or single machine work environments.
Screen size: 10.4 inches.
Display color: 256 color or more color.
Installation type: compatible with video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly.
Series Name: F940GOT.
System screen display language: chinese.
Display: 5.7 inches, suitable for a variety of applications, GOT.
Display color: 8 color.
Display device: LCD STN.
Resolution: 320 * 240.
Installation type: panel mounting.
The built-in communication port: RS-422 (1ch) /RS-232C (1ch).
Power supply voltage: DC24V MITSUBISHI GT1575V-STBD.
GOT-F900 series can be easily applied to a variety of different applications GT1575V-STBD
3 built-in communication channels.
3 standard communication ports are provided for the same PC (COM2:RS-232C) or a PLC (COM1:RS-232C and COM0:RS-422) communication.
Flexible layout.
F940WGOT can be installed in a vertical or horizontal direction.
The direction of the screen can be directed by programming software MITSUBISHI GT1575V-STBD.
Screen area.
Through the split screen configuration, you can reduce the operating time.
The image can be divided into two or three parts to display.
According to the user''s application example, the menu screen or the operation of the button sometimes on the screen will often be used to.
As a result, it is very time-consuming and inefficient to make a similar picture every time MITSUBISHI GT1575V-STBD. Cable length: 8m.
The connection between the CC-LINK interface unit and the smart GOT.
Applicable model: HandyGOT. QCPU (Q mode) bus connection.
1 joint.
Applicable model: A956WGOT. Optical fiber loop unit.
Applicable models: GT15, GT16, GT27, GT25 GT1575V-STBD MITSUBISHI. Cable length: 0.2m.
For bar code reader (D-SUB9 pin, header) and GOT (MINI-DIN6 pin, male head) RS-232 connection between GT1575V-STBD MITSUBISHI.
Applicable models: GT11, GT21. Protective film for 6.5 inch screen (for HandyGOT).
Scrub (frame: white), 5.
Applicable model: used for hand held GOT GT16. Cable length: 2.5m.
For motion controller CPU (A series, the main base system) and the connection between GOT.
Applicable models: GT16, GT115, GT11 GT1575V-STBD MITSUBISHI GT1575V-STBD. QCPU (Q mode) bus connection.
2 joint.
Applicable models: A985 (-V) /975/970/960/956 (W) GOT. Life is 30000 hours, and the user can simply change the background light.
Application Series: F9930GOT MITSUBISHI GT1575V-STBD. For connection between personal computer (USB) and GOT (RS-232) (adapter and personal computer through GT09-C30USB-5P).
Applicable model: GT10.
System screen display language: chinese.
Display: 5.7 inches, suitable for a variety of applications, GOT.
Display color: 8 color.
Display device: LCD STN.
Resolution: 320 * 240.
Installation type: panel mounting.
The built-in communication port: RS-422 (1ch) /RS-232C (1ch).
Power supply voltage: DC24V MITSUBISHI GT1575V-STBD.
GOT-F900 series can be easily applied to a variety of different applications GT1575V-STBD
3 built-in communication channels.
3 standard communication ports are provided for the same PC (COM2:RS-232C) or a PLC (COM1:RS-232C and COM0:RS-422) communication.
Flexible layout.
F940WGOT can be installed in a vertical or horizontal direction.
The direction of the screen can be directed by programming software MITSUBISHI GT1575V-STBD.
Screen area.
Through the split screen configuration, you can reduce the operating time.
The image can be divided into two or three parts to display.
According to the user''s application example, the menu screen or the operation of the button sometimes on the screen will often be used to.
As a result, it is very time-consuming and inefficient to make a similar picture every time MITSUBISHI GT1575V-STBD. Cable length: 8m.
The connection between the CC-LINK interface unit and the smart GOT.
Applicable model: HandyGOT. QCPU (Q mode) bus connection.
1 joint.
Applicable model: A956WGOT. Optical fiber loop unit.
Applicable models: GT15, GT16, GT27, GT25 GT1575V-STBD MITSUBISHI. Cable length: 0.2m.
For bar code reader (D-SUB9 pin, header) and GOT (MINI-DIN6 pin, male head) RS-232 connection between GT1575V-STBD MITSUBISHI.
Applicable models: GT11, GT21. Protective film for 6.5 inch screen (for HandyGOT).
Scrub (frame: white), 5.
Applicable model: used for hand held GOT GT16. Cable length: 2.5m.
For motion controller CPU (A series, the main base system) and the connection between GOT.
Applicable models: GT16, GT115, GT11 GT1575V-STBD MITSUBISHI GT1575V-STBD. QCPU (Q mode) bus connection.
2 joint.
Applicable models: A985 (-V) /975/970/960/956 (W) GOT. Life is 30000 hours, and the user can simply change the background light.
Application Series: F9930GOT MITSUBISHI GT1575V-STBD. For connection between personal computer (USB) and GOT (RS-232) (adapter and personal computer through GT09-C30USB-5P).
Applicable model: GT10.
...More relevant models >>>>
Last one: MITSUBISHI 10.4 inch touch screen GT1575V-STBA
next one: MITSUBISHI 10.4 inch touch screen GT1575-STBA
Related download