Home
>> Products
>> MITSUBISHI
>> Touch Screen
>> GOT1000 series touch screen
>> GT15 touch screen
>> GT1595-XTBA | MITSUBISHI 15 Inch Touch Screen GT1595-XTBA
GT1595-XTBA | MITSUBISHI 15 Inch Touch Screen GT1595-XTBA
Brand:
MITSUBISHI
Name: 15 Inch Touch Screen
Model: GT1595-XTBA
A series of high performance models that are widely used in network or single machine work environments.
Screen size: 15 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: XGA (1024 x 768).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly.
...More relevant models >>>>
Name: 15 Inch Touch Screen
Model: GT1595-XTBA
A series of high performance models that are widely used in network or single machine work environments.
Screen size: 15 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: XGA (1024 x 768).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly.
Function: the core function of the condensed display.
Screen size: 4.3 inch widescreen.
Resolution: 480 * 272dot.
Display: TFT color.
Panel color: black.
Power type: DC24V.
To open up a new vision of the standard model.
Small new Widescreen models!
Compact fuselage 4.3 inch Widescreen TFT65536 color lcd,
To achieve a high resolution of 480 x 272dot!
Can hold a large amount of information!
Small images can also be a lot of information displayed colorful MITSUBISHI GT1595-XTBA GT1595-XTBA
In order to cope with the use of a variety of scenarios, to abandon all the nonsense of the decoration,
Simple design with straight line tone.
Surface mining pure plane design, easy to clean. (USB interface at the back)
Can connect to the computer to transfer data MITSUBISHI GT1595-XTBA.
Up to 2 different manufacturers can be connected to the FA machine.
Can be connected to a variety of FA machines, bar code reader.
Can connect all kinds of FA machine, bar code reader, serial printer. Cable length: 0.7m.
For the connection between the two graphic operations.
Applicable models: GT16, GT15, GT11. For the GT1665M-STB.
Applicable model: GT16. Function: high performance and low price in the middle end model MITSUBISHI GT1595-XTBA.
Picture size: 10.4 inches.
Resolution: VGA.
Display: TFT color.
Panel color: white.
Power type: AC100~240V.
Communication interface: CC-Link IE network communication module set GT1595-XTBA MITSUBISHI.
Middle end model of high performance and low price.
GT25 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface GT1595-XTBA MITSUBISHI.
Even in the log, script, alarm, soft component data transmission, such as high load processing period, but also to achieve smooth operation of the screen.
Connect GOT front USB interface and computer,
Can be through the FA, the GOT machine programming, start and adjust the operation,
Save the trouble of opening the control cabinet and changing the cable GT1595-XTBA MITSUBISHI.
1, USB interface: device USB machine (Mini-B USB)
Can connect to the computer to transfer data.
2, USB interface: host USB (USB-A)
USB data can be transmitted through the USB memory or read log data, such as the GOT data, but also can be connected to the use of the mouse, keyboard.
3, the extension of the interface
Communication module and optional module cann be installed GT1595-XTBA.
4, Ethernet interface
Up to 4 different manufacturers can be connected at the same time
FA machine.
5, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
6, RS-422/485 interfface
Can be connected to a variety of FA machines, bar code reader MITSUBISHI GT1595-XTBA.
7, SD memory card slot
Can save alarm and log data, such as a large number of data.
Screen size: 4.3 inch widescreen.
Resolution: 480 * 272dot.
Display: TFT color.
Panel color: black.
Power type: DC24V.
To open up a new vision of the standard model.
Small new Widescreen models!
Compact fuselage 4.3 inch Widescreen TFT65536 color lcd,
To achieve a high resolution of 480 x 272dot!
Can hold a large amount of information!
Small images can also be a lot of information displayed colorful MITSUBISHI GT1595-XTBA GT1595-XTBA
In order to cope with the use of a variety of scenarios, to abandon all the nonsense of the decoration,
Simple design with straight line tone.
Surface mining pure plane design, easy to clean. (USB interface at the back)
Can connect to the computer to transfer data MITSUBISHI GT1595-XTBA.
Up to 2 different manufacturers can be connected to the FA machine.
Can be connected to a variety of FA machines, bar code reader.
Can connect all kinds of FA machine, bar code reader, serial printer. Cable length: 0.7m.
For the connection between the two graphic operations.
Applicable models: GT16, GT15, GT11. For the GT1665M-STB.
Applicable model: GT16. Function: high performance and low price in the middle end model MITSUBISHI GT1595-XTBA.
Picture size: 10.4 inches.
Resolution: VGA.
Display: TFT color.
Panel color: white.
Power type: AC100~240V.
Communication interface: CC-Link IE network communication module set GT1595-XTBA MITSUBISHI.
Middle end model of high performance and low price.
GT25 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface GT1595-XTBA MITSUBISHI.
Even in the log, script, alarm, soft component data transmission, such as high load processing period, but also to achieve smooth operation of the screen.
Connect GOT front USB interface and computer,
Can be through the FA, the GOT machine programming, start and adjust the operation,
Save the trouble of opening the control cabinet and changing the cable GT1595-XTBA MITSUBISHI.
1, USB interface: device USB machine (Mini-B USB)
Can connect to the computer to transfer data.
2, USB interface: host USB (USB-A)
USB data can be transmitted through the USB memory or read log data, such as the GOT data, but also can be connected to the use of the mouse, keyboard.
3, the extension of the interface
Communication module and optional module cann be installed GT1595-XTBA.
4, Ethernet interface
Up to 4 different manufacturers can be connected at the same time
FA machine.
5, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
6, RS-422/485 interfface
Can be connected to a variety of FA machines, bar code reader MITSUBISHI GT1595-XTBA.
7, SD memory card slot
Can save alarm and log data, such as a large number of data.
...More relevant models >>>>
Last one: MITSUBISHI 5.7 Inch Touch Screen GT1450-QLBDE
next one: MITSUBISHI 15 Inch Touch Screen GT1595-XTBD
Related download