Home
>> Products
>> MITSUBISHI
>> Touch Screen
>> GOT2000 series touch screen
>> GT23 touch screen
>> GT2310-VTBD MITSUBISHI 10.4 inch touch screen
GT2310-VTBD MITSUBISHI 10.4 inch touch screen
Brand:
MITSUBISHI
Name: 10.4 inch touch screen
Model: GT2310-VTBD
Features: high cost of second models.
Picture size: 10.4 inches.
Resolution: VGA.
Display: TFT color.
Panel color: black.
Power type: DC24V.
Specification rich, design at ease
GT23 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface.
Support log, one to many connections, FA transparent transmission and other diverse FA machine related functions.
System configuration diagram shows in order to form the connection with the GOT programmable controller system,
Easily confirm module status. In addition, after touching each module,
Can start its corresponding expansion function, to facilitate system maintenance, shorten the time of failure.
1, simple design
In order to cope with the use of a variety of scenarios, to abandon all the nonsense of the decoration, the use of straight tone of the minimalist design.
2, plane body
Surface mining pure plane design, easy to clean. (USB interface at the back)
3, Ethernet interface
Up to 2 different manufacturers can be connected to the FA machine.
4, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
5, RS-422/485 interface
Can be connected to a variety of FA machines, bar code reader.
6, USB interface: device USB (Mini-B USB)
Can connect to the computer to transfer data.
7, USB interface: host USB (USB-A)
USB data can be transmitted through the USB memory or read log data, such as the GOT data, but also can be connected to the use of the mouse, keyboard.
8, SD memory card slot
Can save alarm and log data, such as a large number of data.
Can be collected through the GOT programmable controller, temperature regulator and other data, and to chart, list display.
Computer analysis can also be used to save the data. Even in the case of a power outage, the log data can be saved to the built-in SRAM.
...More relevant models >>>>
Name: 10.4 inch touch screen
Model: GT2310-VTBD
Features: high cost of second models.
Picture size: 10.4 inches.
Resolution: VGA.
Display: TFT color.
Panel color: black.
Power type: DC24V.
Specification rich, design at ease
GT23 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface.
Support log, one to many connections, FA transparent transmission and other diverse FA machine related functions.
System configuration diagram shows in order to form the connection with the GOT programmable controller system,
Easily confirm module status. In addition, after touching each module,
Can start its corresponding expansion function, to facilitate system maintenance, shorten the time of failure.
1, simple design
In order to cope with the use of a variety of scenarios, to abandon all the nonsense of the decoration, the use of straight tone of the minimalist design.
2, plane body
Surface mining pure plane design, easy to clean. (USB interface at the back)
3, Ethernet interface
Up to 2 different manufacturers can be connected to the FA machine.
4, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
5, RS-422/485 interface
Can be connected to a variety of FA machines, bar code reader.
6, USB interface: device USB (Mini-B USB)
Can connect to the computer to transfer data.
7, USB interface: host USB (USB-A)
USB data can be transmitted through the USB memory or read log data, such as the GOT data, but also can be connected to the use of the mouse, keyboard.
8, SD memory card slot
Can save alarm and log data, such as a large number of data.
Can be collected through the GOT programmable controller, temperature regulator and other data, and to chart, list display.
Computer analysis can also be used to save the data. Even in the case of a power outage, the log data can be saved to the built-in SRAM.
CC-Link (remote device station).
Twisted pair. Series Name: A956GOT.
Size: 6 inches.
Resolution: 320 * 240.
Display device: STN color display.
Display color: 8 color.
Power supply: DC24V.
Memory card: 1M.
The external model design model of creating the system function is mainly to consider the data structure, the overall structure and the process description of the software,
The interface design is usually only used as accessories, only on the user''s situation (including age, gender, mental status, education level, personality, ethnic background and etc GT2310-VTBD MITSUBISHI GT2310-VTBD ) to understand, to design an effective user interface;
According to the user model of the future system of the end user (for short),
In the end, it is consistent with the system image (external characteristic) of the system after the system is realized,
Users can be satisfied with the system and be able to use it effectively;
When the user model is established, the information given by the system should be considered,
System mapping must accurately reflect the syntax and semantic information of the system GT2310-VTBD MITSUBISHI.
In short, only to understand the user, to understand the task in order to design a good man-machine interface GT2310-VTBD MITSUBISHI. Protective film for 8.4 inch screen.
Transparent, 5.
Applicable model: GT12. Bus cables used for GOT1000 to replace the ferrite cores used in the existing GOT-A900 bus cables.
Applicable models: GT16, GT15, GT11, GT27, GT25. Connecting cable for handheld RH GOT and PLC.
Cable length: 1.5 meters.
Application: RS-232C connection (Q series (except for QnU). Cable length: 3m.
Connection conversion box for Q/LCPU and hand held GOT.
Applicable model: GT10. Series introduction: with a variety of first type functions and communication interface standard model.
Screen size: 5.7 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: QVGA (320 x 240).
Display device: STN monochrome.
Host frame color: black.
Power type: DC24V.
With a built-in Ethernet communication interface.
Standard model with various pre - and communication interface.
User storage capacity: 9MB.
Device USB interface.
Standard Ethernet, RS-422/485 and RS-232 interface.
The standard SD card interface.
According to the working principle of the touch screen and the transmission of informatiion of the media, the touch screen is divided into four kinds,
They are resistive, capacitive, inductive, infrared, and surface acoustic waves GT2310-VTBD.
Each touch screen has its own advantages and disadvantages, to understand which kind of touchh screen to apply to what kind of occasion,
The key is to understand the working principle and characteristics of each type of touch screen technology GT2310-VTBD.
Twisted pair. Series Name: A956GOT.
Size: 6 inches.
Resolution: 320 * 240.
Display device: STN color display.
Display color: 8 color.
Power supply: DC24V.
Memory card: 1M.
The external model design model of creating the system function is mainly to consider the data structure, the overall structure and the process description of the software,
The interface design is usually only used as accessories, only on the user''s situation (including age, gender, mental status, education level, personality, ethnic background and etc GT2310-VTBD MITSUBISHI GT2310-VTBD ) to understand, to design an effective user interface;
According to the user model of the future system of the end user (for short),
In the end, it is consistent with the system image (external characteristic) of the system after the system is realized,
Users can be satisfied with the system and be able to use it effectively;
When the user model is established, the information given by the system should be considered,
System mapping must accurately reflect the syntax and semantic information of the system GT2310-VTBD MITSUBISHI.
In short, only to understand the user, to understand the task in order to design a good man-machine interface GT2310-VTBD MITSUBISHI. Protective film for 8.4 inch screen.
Transparent, 5.
Applicable model: GT12. Bus cables used for GOT1000 to replace the ferrite cores used in the existing GOT-A900 bus cables.
Applicable models: GT16, GT15, GT11, GT27, GT25. Connecting cable for handheld RH GOT and PLC.
Cable length: 1.5 meters.
Application: RS-232C connection (Q series (except for QnU). Cable length: 3m.
Connection conversion box for Q/LCPU and hand held GOT.
Applicable model: GT10. Series introduction: with a variety of first type functions and communication interface standard model.
Screen size: 5.7 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: QVGA (320 x 240).
Display device: STN monochrome.
Host frame color: black.
Power type: DC24V.
With a built-in Ethernet communication interface.
Standard model with various pre - and communication interface.
User storage capacity: 9MB.
Device USB interface.
Standard Ethernet, RS-422/485 and RS-232 interface.
The standard SD card interface.
According to the working principle of the touch screen and the transmission of informatiion of the media, the touch screen is divided into four kinds,
They are resistive, capacitive, inductive, infrared, and surface acoustic waves GT2310-VTBD.
Each touch screen has its own advantages and disadvantages, to understand which kind of touchh screen to apply to what kind of occasion,
The key is to understand the working principle and characteristics of each type of touch screen technology GT2310-VTBD.
...More relevant models >>>>
Last one: MITSUBISHI 10.4 inch touch screen GT2310-VTBA
next one: MITSUBISHI 8.4 Inch Touch Screen GT2308-VTBA
Related download