Home
>> Products
>> OMRON
>> Switch
>> The micro switch
>> Super miniature micros witch
>> J-7-V2 | OMRON Ultra Subminiature Basic Switch J-7-V2
J-7-V2 | OMRON Ultra Subminiature Basic Switch J-7-V2
Brand:
OMRON
Name: Ultra Subminiature Basic Switch
Model: J-7-V2
Actuator: Hinge roller lever.
Subminiature Models.
Capable of Large-capacity.
load of 7A.
Snap-action switch allows large-capacity.
switching (7A at 250 VAC) in spite of its small size.
Particularly suitable as control switches for,
applications where there are restrictions on,
installation space and weight. Actuator: Hinge roller lever.
Subminiature Models.
Capable of Large-capacity.
load of 7A.
Snap-action switch allows large-capacity.
switching (7A at 250 VAC) in spite of its small size.
Particularly suitable as control switches for,
applications where there are restrictions on,
installation space and weight.
...More relevant models >>>>
Name: Ultra Subminiature Basic Switch
Model: J-7-V2
Actuator: Hinge roller lever.
Subminiature Models.
Capable of Large-capacity.
load of 7A.
Snap-action switch allows large-capacity.
switching (7A at 250 VAC) in spite of its small size.
Particularly suitable as control switches for,
applications where there are restrictions on,
installation space and weight. Actuator: Hinge roller lever.
Subminiature Models.
Capable of Large-capacity.
load of 7A.
Snap-action switch allows large-capacity.
switching (7A at 250 VAC) in spite of its small size.
Particularly suitable as control switches for,
applications where there are restrictions on,
installation space and weight.
Appearance: Square/Projection type LED lighting,
(without Voltage Reduction Unit) A22L-C.
Output: SPST-NO + SPST-NC + SPST-NC.
Lighting: LED.
Operating voltage: 24 VAC/VDC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia OMRON J-7-V2. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit J-7-V2
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals OMRON J-7-V2.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Sealed Subminiature Basic.
Switch Conforming to IP67.
(Excluding the terminals on terminal models).
Use of epoxy resin assures stable sealing,
making this switch ideal for places subject to,
water spray or excessive dust.
Ideal for automobiles, automatic vending,
machines, refrigerators, ice-making equipment,
bath equipment, hot-water supply systems, air,
conditioners, and industrial equipments, which,
require high environmental resistance OMRON J-7-V2.
Models available with UL, CSA, and VDE safety,
standard compliance. Type: square J-7-V2 OMRON.
Screen mode: no segmentation.
Output: SPDT.
Power supply voltage: DC12V.
Contact type: standard load (AC250V, 3A; DC30V, 3A).
Operation: alternating action (self retaining) J-7-V2 OMRON.
Operation Department color: Red / green.
In the touch and the ability to protect than OMRON''s previous models have improved.
The micro volume designn of 23mm is realized J-7-V2.
Micro design and unique combination of soft sensing.
LED has five colors (red, yellow, green, white, and blue) J-7-V2 OMRON.
Built in basic switch improves touch.
Built in basic switches in the previous modell based on the OMRON to improve the protection OMRON J-7-V2.
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient.
(without Voltage Reduction Unit) A22L-C.
Output: SPST-NO + SPST-NC + SPST-NC.
Lighting: LED.
Operating voltage: 24 VAC/VDC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia OMRON J-7-V2. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit J-7-V2
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals OMRON J-7-V2.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Sealed Subminiature Basic.
Switch Conforming to IP67.
(Excluding the terminals on terminal models).
Use of epoxy resin assures stable sealing,
making this switch ideal for places subject to,
water spray or excessive dust.
Ideal for automobiles, automatic vending,
machines, refrigerators, ice-making equipment,
bath equipment, hot-water supply systems, air,
conditioners, and industrial equipments, which,
require high environmental resistance OMRON J-7-V2.
Models available with UL, CSA, and VDE safety,
standard compliance. Type: square J-7-V2 OMRON.
Screen mode: no segmentation.
Output: SPDT.
Power supply voltage: DC12V.
Contact type: standard load (AC250V, 3A; DC30V, 3A).
Operation: alternating action (self retaining) J-7-V2 OMRON.
Operation Department color: Red / green.
In the touch and the ability to protect than OMRON''s previous models have improved.
The micro volume designn of 23mm is realized J-7-V2.
Micro design and unique combination of soft sensing.
LED has five colors (red, yellow, green, white, and blue) J-7-V2 OMRON.
Built in basic switch improves touch.
Built in basic switches in the previous modell based on the OMRON to improve the protection OMRON J-7-V2.
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient.
...More relevant models >>>>
Last one: OMRON Ultra Subminiature Basic Switch J-7-V22
next one: OMRON Super small micro switch D2MQ Series
Related download