Home
>> Products
>> OMRON
>> Energy saving/Environmental protection testing equipment
>> Electricity monitoring
>> KM20-CTF-100A | OMRON KM20-CTF-100A Smart Power Monitor
KM20-CTF-100A | OMRON KM20-CTF-100A Smart Power Monitor
Brand:
OMRON
Name: Smart Power Monitor
Model: KM20-CTF-100A
Rated primary current: 100 A.
Rated secondary current: Special output.
Installation: Installed separately.
High-performance Power Monitor Suitable for On-panel Mounting and Display.
Assists Energy-saving Analysis.
Energy classification for wasted standby and stopped power.
(Classification based on external inputs is also supported.)
Power and current can be measured simultaneously.
Measurement of flow rates with a pulse conversion function.
Simple temperature measurements with Temperature Sensor included in the Unit.
High-precision Measurements.
Measurement of generated power (regenerative power),
leading reactive power, lagging reactive power, and consumed power.
Power measurements on the primary side of inverters,
which are widely used to save energy.
Automatic range switching for accurate measurement of standby and stopped power.
Energy-saving Functions.
Conversion to monetary cost. (Also used for classified standby and stopped power.)
Alarm outputs can be selected for active power, reactive power,
regenerative power, current, voltage, or power factor.
The Power Monitor can log measurement data and supports Modbus communications.
Installation and Settings.
Direct measurement of three-phase, four-wire, 400-V line voltage.
Simple measurements without voltage wiring.
Incorrect voltage wiring detection.
...More relevant models >>>>
Name: Smart Power Monitor
Model: KM20-CTF-100A
Rated primary current: 100 A.
Rated secondary current: Special output.
Installation: Installed separately.
High-performance Power Monitor Suitable for On-panel Mounting and Display.
Assists Energy-saving Analysis.
Energy classification for wasted standby and stopped power.
(Classification based on external inputs is also supported.)
Power and current can be measured simultaneously.
Measurement of flow rates with a pulse conversion function.
Simple temperature measurements with Temperature Sensor included in the Unit.
High-precision Measurements.
Measurement of generated power (regenerative power),
leading reactive power, lagging reactive power, and consumed power.
Power measurements on the primary side of inverters,
which are widely used to save energy.
Automatic range switching for accurate measurement of standby and stopped power.
Energy-saving Functions.
Conversion to monetary cost. (Also used for classified standby and stopped power.)
Alarm outputs can be selected for active power, reactive power,
regenerative power, current, voltage, or power factor.
The Power Monitor can log measurement data and supports Modbus communications.
Installation and Settings.
Direct measurement of three-phase, four-wire, 400-V line voltage.
Simple measurements without voltage wiring.
Incorrect voltage wiring detection.
Type: related equipment (sold separately); split type current transformer (CT).
Rated primary side current: 500A.
Rated two secondary current: 1A.
Simple monitoring of the use of electricity to support energy saving countermeasures.
On behalf of the use of the mechanical equipment, the measurement of the initial voltage, current,
Cumulative quantity, invalid power, power factor, frequency OMRON KM20-CTF-100A KM20-CTF-100A
To achieve a simple record with a memory card. (with memory card function model)
The measurement data can be stored in the main body, and the centralized monitoring and management can be carried out in the communication network.
Wide 45mm miniaturization, simple set to the DIN guide. Name: Department of workstation " OMRON KM20-CTF-100A.
Power supply: DC cable.
Strong support for the construction of power consumption monitoring system!
1 buttons to easily focus on 31 sets of KM series machine.
With the software to easily save data graphics.
The KM connection can be easily set with special software. "Air purification unit.
Apply: 250mm.
Power specifications: DC24V.
The more thin, more large wind ZN series flexible and quickly realize the cleaning OMRON KM20-CTF-100A.
Can be based on the size of the clean room selection of 3 sizes. A strong support for the construction of power consumption monitoring system!
1 buttons to easily focus on 31 sets of KM series machine KM20-CTF-100A OMRON.
With the software to easily save data graphics.
The KM connection can be easily set with special software. Application: 410 × 410 mm.
Power supply: 24 VDC KM20-CTF-100A OMRON.
The ZN series is even thinner and,
sports improved air volume.
These products enable cleaning that,
is both fast and flexible.
Three sizes are available to mmatch various sizes of clean booths KM20-CTF-100A. Item: Sensor head 10 m type.
Easy temperature and humidity control with an SD Card. Item (Measured particle diameter): Air Particle Sensor,
Dust measurement type, 5 µm (10 µm), 20 µm (30 µm)), 50 µm min KM20-CTF-100A OMRON OMRON KM20-CTF-100A.
Make your entire production environment visible.
Multi-point monitoring of environmental data and central control.
Rated primary side current: 500A.
Rated two secondary current: 1A.
Simple monitoring of the use of electricity to support energy saving countermeasures.
On behalf of the use of the mechanical equipment, the measurement of the initial voltage, current,
Cumulative quantity, invalid power, power factor, frequency OMRON KM20-CTF-100A KM20-CTF-100A
To achieve a simple record with a memory card. (with memory card function model)
The measurement data can be stored in the main body, and the centralized monitoring and management can be carried out in the communication network.
Wide 45mm miniaturization, simple set to the DIN guide. Name: Department of workstation " OMRON KM20-CTF-100A.
Power supply: DC cable.
Strong support for the construction of power consumption monitoring system!
1 buttons to easily focus on 31 sets of KM series machine.
With the software to easily save data graphics.
The KM connection can be easily set with special software. "Air purification unit.
Apply: 250mm.
Power specifications: DC24V.
The more thin, more large wind ZN series flexible and quickly realize the cleaning OMRON KM20-CTF-100A.
Can be based on the size of the clean room selection of 3 sizes. A strong support for the construction of power consumption monitoring system!
1 buttons to easily focus on 31 sets of KM series machine KM20-CTF-100A OMRON.
With the software to easily save data graphics.
The KM connection can be easily set with special software. Application: 410 × 410 mm.
Power supply: 24 VDC KM20-CTF-100A OMRON.
The ZN series is even thinner and,
sports improved air volume.
These products enable cleaning that,
is both fast and flexible.
Three sizes are available to mmatch various sizes of clean booths KM20-CTF-100A. Item: Sensor head 10 m type.
Easy temperature and humidity control with an SD Card. Item (Measured particle diameter): Air Particle Sensor,
Dust measurement type, 5 µm (10 µm), 20 µm (30 µm)), 50 µm min KM20-CTF-100A OMRON OMRON KM20-CTF-100A.
Make your entire production environment visible.
Multi-point monitoring of environmental data and central control.
...More relevant models >>>>
Last one: 
next one: Related download