Knob-type Selector Switch A165S-A2M-2 OMRON A165S-A2M-2

OMRON Knob-type Selector SwitchA165S-A2M-2

A165S-A2M-2 Introduce | A165S-A2M-2 Catalog / Manual / Instructions / Software download

Brand: OMRON
Name: Knob-type Selector Switch
Model: A165S-A2M-2
No. of notches: 2 notches.
Output: SPDT.
Reset method: Manual.
Lighting method: Non-lighted.
Separate Construction with Cylindrical.
16-dia. Body.
Same separate construction as the A16-series Pushbuttons with,
Miniature Design of 28.5 mm.
The same contacts can be used for both standard loads and,
microloads.
Oil-resistant IP65 models,
Conforms to EN60947-5-1.

Appearance: Knob-type Selector Switch A22W,
LED lighting (without Voltage Reduction Unit).
Number of notches: 3 notches.
Resetting method: Manual.
Output: SPST-NC + SPST-NC.
Operating voltage: 6 VAC/VDC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia OMRON A165S-A2M-2. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature A165S-A2M-2
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Ratings: 1 A at 30 VDC.
LED indicator: Without indicator OMRON A165S-A2M-2.
Actuator: High-sensitivity roller lever.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) OMRON A165S-A2M-2.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Socket Unit A165S-A2M-2 OMRON.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts A165S-A2M-2 OMRON.
Mounted using either open-type (fork-type) or closed-type,
(round type) crimp terminals.
IP65 oil resistance. Ratings: 1 A at 125 VAC.
LED indicator: With indicator.
Actuator: Roller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enablee ganged mounting A165S-A2M-2 OMRON A165S-A2M-2.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
((standard indicator is lit when Switch is not operating) OMRON A165S-A2M-2.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)

...More relevant models >>>>