MITSUBISHI A series PLCCPU connection cable GP430-IP10-O Proface GP430-IP10-O

12 way 2 digital signals into analog signals and output resultsCable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex).For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters Proface GP430-IP10-O. 5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Used in a variety of host and man-machine interface for RS-232C connectionData transmission cable between host and LT series GP430-IP10-O Length: 5 meters.Used to install the human machine interface to the fixed panel (2 / cover) Proface GP430-IP10-O. The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.12.1 inches, replaced by a host of backlight (1).Memory for extending EX GP-Pro alarm and character table functions.The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display Proface GP430-IP10-O. 10.4 inches and above, used to connect the power cord (5 / set).Suitable for LT4000M/GP4000M series modules, 3.5 inch GP430-IP10-O Proface. Connector for connecting DC power cord (5 / set).4.3 Inch Touch Screen anti UV protective film (1 pieces).Slave station module for connecting support for CANopen5 GP430-IP10-O Proface. 7 inches, replace the backlight (1 / set)For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Standard interfface cable for connecting GP and external devices (such as the main controller), with a universal filter GP430-IP10-O.
Length of 5 meters. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputtFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters GP430-IP10-O Proface Proface GP430-IP10-O.