LK166
Home >> Products >> MITSUBISHI >> Servo driver/Servo motor >> MR-J2 series >> HC-(KF/SF/MF/RF/UF),HA-(LF/FF) motor >> MITSUBISHI HC-SF702 Medium inertia medium capacity motor

MITSUBISHI HC-SF702 Medium inertia medium capacity motor

Brand: MITSUBISHI
Name: Medium inertia medium capacity motor
Model: HC-SF702
Motor series: medium inertia, medium capacity.
Using a serial absolute / incremental encoder.
Rated output power: 7.0kw.
Rated speed: 2000rpm.
With the brake: without.
Shaft end: straight shaft.
The rotor of AC servo motor is usually made of squirrel cage, but in order to make the servo motor has a wide range of speed regulation, linear mechanical properties,
Without the "rotation" phenomenon and the performance of the fast response, it is compared with the ordinary motor,
The two characteristics of rotor resistance and moment of inertia should be provided.
At present, there are two kinds of rotor structure, one is the squirrel cage rotor, which is made of conductive material with high resistivity,
In order to reduce the moment of inertia of the rotor, the rotor is slender.

Motor series: low inertia, medium power.
Rated output power: 30.0kw.
Rated speed: 1000r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range MITSUBISHI HC-SF702. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting HC-SF702
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring MITSUBISHI HC-SF702. Motor series: low inertia, medium capacity.
Rated output power: 7.0kw.
Rated speed: 1500rpm.
With the brake: without.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor MITSUBISHI HC-SF702.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines). Servo motor series: low inertia, medium / high power.
Rated output: 22.0kw.
Rated speed: 1500r/min.
Electromagnetic brake: No.
Shaft end specification: Standard (straight axis).
Features: low inertia has low medium and high speed three models, suitable for different applications as a standard, 30KW and above sservo motor can be installed flange or bracket HC-SF702.
IP level: IP44.
Application example:
1, injection molding machine.
2, semiconductor manufacturing equipment.
3, large material handling system.
4, stamping machine.
Abundant motor product linee can optimize the performance of the machine HC-SF702.
Has a rich motor product line including a rotary servo motor, linear servo motor and direct drive motor.


...More relevant models >>>>