Home
>> Products
>> MITSUBISHI
>> Servo driver/Servo motor
>> MR-C series
>> MR-C10A Servo driver MITSUBISHI MR-C10A
MR-C10A Servo driver MITSUBISHI MR-C10A
Brand:
MITSUBISHI
Name: Servo driver
Model: MR-C10A
Type: MR-C type.
Symbol 10A for motor models: HC-PQ033/053/13.
Power supply voltage: single phase AC220V.
Drive: servo drive in the development of the premise of the frequency conversion technology,
Current loop in the drive,
Speed loop and position loop (frequency converter without the ring) have carried out a more precise control than the general frequency control technology and algorithm,
In function is also a lot stronger than the traditional servo,
The main point can be precise position control.
The control speed and position are controlled by the pulse sequence transmitted by the upper controller,
The internal algorithm of the driver and the faster and more accurate calculation and better performance of electronic devices to make it more superior to the inverter.
...More relevant models >>>>
Name: Servo driver
Model: MR-C10A
Type: MR-C type.
Symbol 10A for motor models: HC-PQ033/053/13.
Power supply voltage: single phase AC220V.
Drive: servo drive in the development of the premise of the frequency conversion technology,
Current loop in the drive,
Speed loop and position loop (frequency converter without the ring) have carried out a more precise control than the general frequency control technology and algorithm,
In function is also a lot stronger than the traditional servo,
The main point can be precise position control.
The control speed and position are controlled by the pulse sequence transmitted by the upper controller,
The internal algorithm of the driver and the faster and more accurate calculation and better performance of electronic devices to make it more superior to the inverter.
MR-J2M multi axis servo amplifier.
Interface type: general purpose interface.
A feedback control system to accurately reproduce or follow a process.
In many cases, refers to the servo system is to control the amount of (the system output) is a feedback control system of mechanical displacement or displacement velocity and acceleration
Its function is to make the output of the mechanical displacement (or rotation angle) accurately track the input displacement (or rotation angle) MITSUBISHI MR-C10A MR-C10A
The structural composition of the servo system and other forms of feedback control systems are not distinguished in principle. Motor series: low inertia, medium capacity.
Rated output power: 30.0kw.
Rated speed: 1000rpm MITSUBISHI MR-C10A.
With the brake: without.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines) MITSUBISHI MR-C10A. Type: HF-SN servo motor, medium inertia power.
Rated output power: 1.0kw.
Rated speed: 2000r/min.
Electromagnetic brake: there.
Oil seal: have.
Encoder resolution: 131072p/r MR-C10A MITSUBISHI.
S100 representative: Super MR-E special motor.
KH003 special mark for Super MR-E.
High performance and easy to operate, reduce work load.
Enhanced system cost performance MR-C10A MITSUBISHI.
High performance, high precision positioning (servo motor encoder resolution: 131072).
High response.
Suppression of vibration by adaptive vibration suppression control.
Using personal computer and servo setup software to optimize tuning.
Has 2 types of interfaces:
Position control and speed control with pulse train interface MR-C10A MITSUBISHI.
The analog input interface is used for speed control and torque control.
Wide use.
Machining equipment and machine tool feed.
Used foor food, packaging equipment and feeding device MR-C10A.
For textile machinery, etc..
Can improve the performance of equipment.
Servo amplifier terminals are used to reduce the required wiring time.
The connector is located in front of thhe servo amplifier, which is convenient for cable connection MITSUBISHI MR-C10A.
The gain adjustment can be easily carried out by the real-time automatic tuning function.
Interface type: general purpose interface.
A feedback control system to accurately reproduce or follow a process.
In many cases, refers to the servo system is to control the amount of (the system output) is a feedback control system of mechanical displacement or displacement velocity and acceleration
Its function is to make the output of the mechanical displacement (or rotation angle) accurately track the input displacement (or rotation angle) MITSUBISHI MR-C10A MR-C10A
The structural composition of the servo system and other forms of feedback control systems are not distinguished in principle. Motor series: low inertia, medium capacity.
Rated output power: 30.0kw.
Rated speed: 1000rpm MITSUBISHI MR-C10A.
With the brake: without.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines) MITSUBISHI MR-C10A. Type: HF-SN servo motor, medium inertia power.
Rated output power: 1.0kw.
Rated speed: 2000r/min.
Electromagnetic brake: there.
Oil seal: have.
Encoder resolution: 131072p/r MR-C10A MITSUBISHI.
S100 representative: Super MR-E special motor.
KH003 special mark for Super MR-E.
High performance and easy to operate, reduce work load.
Enhanced system cost performance MR-C10A MITSUBISHI.
High performance, high precision positioning (servo motor encoder resolution: 131072).
High response.
Suppression of vibration by adaptive vibration suppression control.
Using personal computer and servo setup software to optimize tuning.
Has 2 types of interfaces:
Position control and speed control with pulse train interface MR-C10A MITSUBISHI.
The analog input interface is used for speed control and torque control.
Wide use.
Machining equipment and machine tool feed.
Used foor food, packaging equipment and feeding device MR-C10A.
For textile machinery, etc..
Can improve the performance of equipment.
Servo amplifier terminals are used to reduce the required wiring time.
The connector is located in front of thhe servo amplifier, which is convenient for cable connection MITSUBISHI MR-C10A.
The gain adjustment can be easily carried out by the real-time automatic tuning function.
...More relevant models >>>>
Last one: MITSUBISHI General motors for MR-JE and MR-E HF-SN302BJ-S100
next one: MITSUBISHI Servo driver MR-C20A
Related download