Home
>> Products
>> MITSUBISHI
>> Servo driver/Servo motor
>> Servo accessories
>> MR-JE accessories
>> MR-J2M-CN1TBL05M Relay terminal station cable MITSUBISHI MR-J2M-CN1TBL05M
MR-J2M-CN1TBL05M Relay terminal station cable MITSUBISHI MR-J2M-CN1TBL05M
Brand:
MITSUBISHI
Name: Relay terminal station cable
Model: MR-J2M-CN1TBL05M
Length: 0.5 meters.
Purpose: MR-JE-A, MR-TB50 connection with.
...More relevant models >>>>
Name: Relay terminal station cable
Model: MR-J2M-CN1TBL05M
Length: 0.5 meters.
Purpose: MR-JE-A, MR-TB50 connection with.
Servo motor series: medium inertia, small capacity.
Rated output: 0.5kw.
Rated speed: 2000r/min.
Electromagnetic brake: No.
Oil seal: incidental (Note 1, note 2, note 3).
Power supply: 200V.
Note 1 through HG-KR and HG-MR series 0.1kW and HG-SR series can be supported.
Note 2 with the speed reducer case, do not configure the oil seal MITSUBISHI MR-J2M-CN1TBL05M.
Note 3 with oil seal HG-KR, HG-MR series servo motor''s appearance size standard is different MR-J2M-CN1TBL05M
Stable driving of medium capacity and medium inertia type products.
Through the optimization of structural design, to achieve the minimum length of the industry.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment.
Reducing the electric torque ripple MITSUBISHI MR-J2M-CN1TBL05M.
Through the combination of the optimal number of the motor and the slot number, the torque ripple is greatly reduced,
To further realize the smooth constant speed device.
Improve the environmental performance of HG-SR, HG-JR series of products using IP67. Motor series: low inertia, medium capacity.
Rated output power: 6.0kw.
Rated speed: 1000rpm.
With the brake: without.
Shaft end: straight shaft MITSUBISHI MR-J2M-CN1TBL05M.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor MR-J2M-CN1TBL05M MITSUBISHI.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines) MR-J2M-CN1TBL05M MITSUBISHI. Servo motor series: low inertia, medium and large capacity.
Rated output: 45.0kw.
Rated speed; 1500r/min.
Electromagnetic brake: incidental.
Power supply: 400V.
Most suitable for medium and large capacity, low inertia type products in high frequency operation or acceleration and deceleration operation MR-J2M-CN1TBL05M MITSUBISHI.
Improve the environmental performance of HG-SR, HG-JR series of prooducts using IP67 MR-J2M-CN1TBL05M.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment.
100 scene, there are 100 different drive control.
In order to meet the needs of the diverse and detailed field,
MR-J4 product line configuration, providing a wealth of servo amplifier and servo motor products MITSUBISHI MR-J2M-CN1TBL05M.
Can meet the different needs of different customers.
Rated output: 0.5kw.
Rated speed: 2000r/min.
Electromagnetic brake: No.
Oil seal: incidental (Note 1, note 2, note 3).
Power supply: 200V.
Note 1 through HG-KR and HG-MR series 0.1kW and HG-SR series can be supported.
Note 2 with the speed reducer case, do not configure the oil seal MITSUBISHI MR-J2M-CN1TBL05M.
Note 3 with oil seal HG-KR, HG-MR series servo motor''s appearance size standard is different MR-J2M-CN1TBL05M
Stable driving of medium capacity and medium inertia type products.
Through the optimization of structural design, to achieve the minimum length of the industry.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment.
Reducing the electric torque ripple MITSUBISHI MR-J2M-CN1TBL05M.
Through the combination of the optimal number of the motor and the slot number, the torque ripple is greatly reduced,
To further realize the smooth constant speed device.
Improve the environmental performance of HG-SR, HG-JR series of products using IP67. Motor series: low inertia, medium capacity.
Rated output power: 6.0kw.
Rated speed: 1000rpm.
With the brake: without.
Shaft end: straight shaft MITSUBISHI MR-J2M-CN1TBL05M.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor MR-J2M-CN1TBL05M MITSUBISHI.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines) MR-J2M-CN1TBL05M MITSUBISHI. Servo motor series: low inertia, medium and large capacity.
Rated output: 45.0kw.
Rated speed; 1500r/min.
Electromagnetic brake: incidental.
Power supply: 400V.
Most suitable for medium and large capacity, low inertia type products in high frequency operation or acceleration and deceleration operation MR-J2M-CN1TBL05M MITSUBISHI.
Improve the environmental performance of HG-SR, HG-JR series of prooducts using IP67 MR-J2M-CN1TBL05M.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment.
100 scene, there are 100 different drive control.
In order to meet the needs of the diverse and detailed field,
MR-J4 product line configuration, providing a wealth of servo amplifier and servo motor products MITSUBISHI MR-J2M-CN1TBL05M.
Can meet the different needs of different customers.
...More relevant models >>>>
Last one: MITSUBISHI Relay terminal station MR-TB50
next one: MITSUBISHI Relay terminal station cable MR-J2M-CN1TBL1M
Related download