Home
>> Products
>> MITSUBISHI
>> Servo driver/Servo motor
>> MR-J3 series
>> MR-J3 amplifier
>> MR-J3-10B1 MITSUBISHI MR-J3-10B1
MR-J3-10B1 MITSUBISHI MR-J3-10B1
Brand:
MITSUBISHI
Name: SSCNET type III optical fiber communication driver
Model: MR-J3-10B1
MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 0.1kw.
Interface type: SSCNET type III fiber communication.
Power specification: single phase AC100V.
High speed serial communication between the SSCNET and the servo amplifier by using the fastest up to 0.44ms communication cycle,
A fully synchronous control system can be constructed.
It is only necessary to insert the special optical fiber into the joint to form SSCNET III network, which greatly reduces the wiring work and reduces the possibility of false wiring.
Due to the adoption of the optical fiber communication, the anti noise ability can be greatly improved and the long distance wiring of 50 meters (maximum 800 meters x 16 axes) can be realized.
A servo amplifier to meet the full closed loop control function MR-J3-B-RJ006.
Suitable for mechanical servo optimization and adjustment!
More advanced optimization adjustment function and control function to maximize mechanical properties.
...More relevant models >>>>
Name: SSCNET type III optical fiber communication driver
Model: MR-J3-10B1
MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 0.1kw.
Interface type: SSCNET type III fiber communication.
Power specification: single phase AC100V.
High speed serial communication between the SSCNET and the servo amplifier by using the fastest up to 0.44ms communication cycle,
A fully synchronous control system can be constructed.
It is only necessary to insert the special optical fiber into the joint to form SSCNET III network, which greatly reduces the wiring work and reduces the possibility of false wiring.
Due to the adoption of the optical fiber communication, the anti noise ability can be greatly improved and the long distance wiring of 50 meters (maximum 800 meters x 16 axes) can be realized.
A servo amplifier to meet the full closed loop control function MR-J3-B-RJ006.
Suitable for mechanical servo optimization and adjustment!
More advanced optimization adjustment function and control function to maximize mechanical properties.
MR-J2M multi axis servo amplifier substrate.
Groove position: 8.
There are many methods for the classification of servo system, and there are three kinds of common classification methods.
(1) classification of parameters of controlled parameters.
(2) according to the type of drive components.
Servo control system according to the type of control components can be divided into mechanical and electrical servo system, hydraulic servo system (hydraulic control system) and pneumatic servo system MITSUBISHI MR-J3-10B1 MR-J3-10B1
(3) according to the control principle.
Servo system can be divided into open loop servo control system, closed loop control servo system and semi closed loop servo system. Servo motor series: flat type, medium capacity MITSUBISHI MR-J3-10B1.
Rated output: 5.0kw.
Rated speed; 2000r/min.
Electromagnetic brake: incidental.
Power supply: 200V.
The most suitable medium capacity, flat type products to limit the installation space of the situation.
Improve the environmental performance of HG-KR, HG-MR, HG-RR, HG-UR series of products using IP65.
100 scene, there are 100 different drive control.
In order to meet the needs of the diverse and detailed field,
MR-J4 product line configuration, providing a wealth of servo amplifier and servo motor products MITSUBISHI MR-J3-10B1.
Can meet the different needs of different customers. Type: MR-J_B series.
Rated output: 0.6KW.
Interface: standard.
Servo system according to the system structure can be divided into open loop servo system, closed loop servo system, semi closed loop system, compound control system.
The closed loop automatic control system with feedback is composed of a position detecting part, a deviation amplifying part, an executing part and a controlled object.
Servo system must have good controllability, high stability and high adaptability.
Note that the control of the signal is good after the disappearance of the signal, can immediately stop the turn;
High stability is the torque with the increase of speed and uniform decline; adaptability is fast, sensitive, and ring state quality is good.
According to the types of servo drives are classified, there are three kinds of electric, hydraulic or electric hydraulic.
If the servo system is divided according to the functioon, then there is a measuring servo and power servo system;
Analog servo and power servo system; position servo and acceleration servo system MR-J3-10B1.
The electric servo system can be divided into two categories: DC DC servo system and AC AC servvo system based on the electrical signals MR-J3-10B1.
AC AC servo system also has two kinds of asynchronous motor servo system and synchronous motor servo system.
Groove position: 8.
There are many methods for the classification of servo system, and there are three kinds of common classification methods.
(1) classification of parameters of controlled parameters.
(2) according to the type of drive components.
Servo control system according to the type of control components can be divided into mechanical and electrical servo system, hydraulic servo system (hydraulic control system) and pneumatic servo system MITSUBISHI MR-J3-10B1 MR-J3-10B1
(3) according to the control principle.
Servo system can be divided into open loop servo control system, closed loop control servo system and semi closed loop servo system. Servo motor series: flat type, medium capacity MITSUBISHI MR-J3-10B1.
Rated output: 5.0kw.
Rated speed; 2000r/min.
Electromagnetic brake: incidental.
Power supply: 200V.
The most suitable medium capacity, flat type products to limit the installation space of the situation.
Improve the environmental performance of HG-KR, HG-MR, HG-RR, HG-UR series of products using IP65.
100 scene, there are 100 different drive control.
In order to meet the needs of the diverse and detailed field,
MR-J4 product line configuration, providing a wealth of servo amplifier and servo motor products MITSUBISHI MR-J3-10B1.
Can meet the different needs of different customers. Type: MR-J_B series.
Rated output: 0.6KW.
Interface: standard.
Servo system according to the system structure can be divided into open loop servo system, closed loop servo system, semi closed loop system, compound control system.
The closed loop automatic control system with feedback is composed of a position detecting part, a deviation amplifying part, an executing part and a controlled object.
Servo system must have good controllability, high stability and high adaptability.
Note that the control of the signal is good after the disappearance of the signal, can immediately stop the turn;
High stability is the torque with the increase of speed and uniform decline; adaptability is fast, sensitive, and ring state quality is good.
According to the types of servo drives are classified, there are three kinds of electric, hydraulic or electric hydraulic.
If the servo system is divided according to the functioon, then there is a measuring servo and power servo system;
Analog servo and power servo system; position servo and acceleration servo system MR-J3-10B1.
The electric servo system can be divided into two categories: DC DC servo system and AC AC servvo system based on the electrical signals MR-J3-10B1.
AC AC servo system also has two kinds of asynchronous motor servo system and synchronous motor servo system.
...More relevant models >>>>
Last one: MITSUBISHI SSCNET type III optical fiber communication driver MR-J3-22KB
next one: MITSUBISHI SSCNET type III optical fiber communication driver MR-J3-20B1
Related download