PC Card Interface Board CV500-MP602 OMRON CV500-MP602

Model : CVM1D-CPU21.
For duplex system requires two.Model : CV1000-CPU01-EV1.
SFC / Ladder 1, 024 points (with RAM62K words, the top internal link).C500-NC Special I/O Unit Position Control For pulse motors 1 axis C500-NC113.Model: C500-COV02.
Connector on the C500 link unit for the base unitI/O Control UnitC500-IA I/O Unit AC Input 16 pts C500-IA222(3G2A5-IA222) OMRON CV500-MP602.
AC200-240V 10mA CV500-MP602C500-IA I/O Unit AC Input 16 pts C500-IA121(3G2A5-IA121).
AC100-120V 10mA.Model : CV1000-DM251.
Available CV1000/2000/CVM1-CPU21-V2.
256K words.No. of I/O slots: 11 slots.Model: C500-BC052(3G2A5-BC052).
5 slots(5 linkable slots).
C500-ID I/O Unit DC Input 32 pts C500-ID215(3G2A5-ID215).
DC12-24V 10mA.C500-NC Special I/O Unit C/CV Servo Module Single Axis Stepper C500-NC111-V1 OMRON CV500-MP602. C500-DA Special I/O Unit Analog Output C500-DA103.
Output: 4 pts.
Specification: -10~+10V.C500-OD I/O Unit Transistor Output 16 pts C500-OD219.
DC12-24V 2.1A.The initial configuration of the G language unit in the industry due to the use of G language,
Complex processing procedures do not need to be able to make the ladder diagram OMRON CV500-MP602.
The realization of the first 1 axis simultaneous control of 4 axis simultaneous control in the industry is due to the multi task function,
Can be executed at the same time or the 2 axis simultaneous control of 4 axes, and then can achieve the 4 axis independent control, etc CV500-MP602 OMRON.
Up to 8 units can be installed CVM1 8 units can be installed 1 units, can control up to 32 axes CV500-MP602 OMRON.
Applicable to ABS encoder by standard,
Applicable to the ABS type (absolute output) encoder, so after the emergency stop, no need to search for the origin, eetc CV500-MP602. .
S curve also according to the standard configuration plus deceleration curve, in addition to the trapezoidal outside,
Also configured to suppress the mechanical vibration of the S shape curve CV500-MP602 OMRON.
Program loginn maximum of up to 100
G language can be programmed with the MC support software GC500-OD I/O Unit Transistor Output 32 pts C500-OD218 OMRON CV500-MP602.
DC12～24V 0.3A.