Home
>> Products
>> MITSUBISHI
>> FX series PLC
>> FX3UC series
>> PLC FX3UC-96MT/DSS MITSUBISHI FX3UC-96MT/DSS
PLC FX3UC-96MT/DSS MITSUBISHI FX3UC-96MT/DSS
Brand:
MITSUBISHI
Name: PLC
Model: FX3UC-96MT/DSS
Input and output points: 96 points.
Input points: 48 points.
Input specifications: drain / source.
Output points: 48 points.
Output form: transistor output (source).
Power consumption: 14W.
Weight: 0.35KG.
Outline dimension: 85.4x90x87mm.
Hard and compact type third generation micro programmable controller.
Connector type input and output type provincial connection.
Greatly strengthened the industry''s highest level of high-speed processing and positioning and other built-in features.
High cost of the province space models.
FX3UC in the province of space, the province also greatly strengthened the connection of high-speed processing and positioning and other built-in features.
The host is built in DC24V power supply, the connector input and output form of the transistor output.
In addition, according to the product mix can also achieve network communications, analog control, data collection and other functions.
Third generation high function micro programmable controller.
Connector type can save space, province wiring.
Built in high speed processing and positioning.
Ultra small size, control points to 256 points.
Construction of CC-Link remote I/O 384 points.
...More relevant models >>>>
Name: PLC
Model: FX3UC-96MT/DSS
Input and output points: 96 points.
Input points: 48 points.
Input specifications: drain / source.
Output points: 48 points.
Output form: transistor output (source).
Power consumption: 14W.
Weight: 0.35KG.
Outline dimension: 85.4x90x87mm.
Hard and compact type third generation micro programmable controller.
Connector type input and output type provincial connection.
Greatly strengthened the industry''s highest level of high-speed processing and positioning and other built-in features.
High cost of the province space models.
FX3UC in the province of space, the province also greatly strengthened the connection of high-speed processing and positioning and other built-in features.
The host is built in DC24V power supply, the connector input and output form of the transistor output.
In addition, according to the product mix can also achieve network communications, analog control, data collection and other functions.
Third generation high function micro programmable controller.
Connector type can save space, province wiring.
Built in high speed processing and positioning.
Ultra small size, control points to 256 points.
Construction of CC-Link remote I/O 384 points.
The analog output adapter (FX3U- - racy -BD)Max input / output points: 48 points.
Supply voltage: 100 - 240VAC.
Input points: 24 points.
Output points: 24 points.
Output type: relay.
Power consumption: 50VA.
Weight (kg):0.85.
Size (WxHxD) mm:182x90x87.
Note recording function, Component annotation can be recorded in the program register MITSUBISHI FX3UC-96MT/DSS.
Online program editor, online change the program will not lose the working hours or stop production operation FX3UC-96MT/DSS
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program MITSUBISHI FX3UC-96MT/DSS.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017). 8 point analog potentiometer function expansion board.Memory format: EEPROM MITSUBISHI FX3UC-96MT/DSS.
Number of steps: up to 4000 steps can be used.
Battery support: do not.
Method for writing and deleting: the device is installed on the PLC, and is written and deleted by the peripheral device. The number of output channels: 4 channels FX3UC-96MT/DSS MITSUBISHI.
Voltage output: DC-10~10V.
Current output: DC0~20mA, DC-4~20mA.
Programmable logic controller: FX2NC, FX3UC.
By using analog input module and output module,
Can be input and output analog (voltage, current, etc FX3UC-96MT/DSS MITSUBISHI. ).
Indispensable analog control in FA control,
It is easy to implement on a programmable logic controller. Cable flat cable;
Connector with 20 pin installed at both ends of the fuse.
Length 1.5M. Output: 16 points FX3UC-96MT/DSS MITSUBISHI.
Function: relay output.
Corresponding models: FX3GA, FX3G, FX3GE, FX3GC, FX3U, FX3UC.
Can caarry on the FX3GC, the FX3UC basic unit and the expansion module or the localization module the connector and the terminal station transformation,
Save the time of the input and output connection, realize the labor saving FX3UC-96MT/DSS.
The use of built-in input and output components models,
Can receive AC100V input, or through the relay or the transistor to drive large capacity load MITSUBISHI FX3UC-96MT/DSS.
Supply voltage: 100 - 240VAC.
Input points: 24 points.
Output points: 24 points.
Output type: relay.
Power consumption: 50VA.
Weight (kg):0.85.
Size (WxHxD) mm:182x90x87.
Note recording function, Component annotation can be recorded in the program register MITSUBISHI FX3UC-96MT/DSS.
Online program editor, online change the program will not lose the working hours or stop production operation FX3UC-96MT/DSS
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program MITSUBISHI FX3UC-96MT/DSS.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017). 8 point analog potentiometer function expansion board.Memory format: EEPROM MITSUBISHI FX3UC-96MT/DSS.
Number of steps: up to 4000 steps can be used.
Battery support: do not.
Method for writing and deleting: the device is installed on the PLC, and is written and deleted by the peripheral device. The number of output channels: 4 channels FX3UC-96MT/DSS MITSUBISHI.
Voltage output: DC-10~10V.
Current output: DC0~20mA, DC-4~20mA.
Programmable logic controller: FX2NC, FX3UC.
By using analog input module and output module,
Can be input and output analog (voltage, current, etc FX3UC-96MT/DSS MITSUBISHI. ).
Indispensable analog control in FA control,
It is easy to implement on a programmable logic controller. Cable flat cable;
Connector with 20 pin installed at both ends of the fuse.
Length 1.5M. Output: 16 points FX3UC-96MT/DSS MITSUBISHI.
Function: relay output.
Corresponding models: FX3GA, FX3G, FX3GE, FX3GC, FX3U, FX3UC.
Can caarry on the FX3GC, the FX3UC basic unit and the expansion module or the localization module the connector and the terminal station transformation,
Save the time of the input and output connection, realize the labor saving FX3UC-96MT/DSS.
The use of built-in input and output components models,
Can receive AC100V input, or through the relay or the transistor to drive large capacity load MITSUBISHI FX3UC-96MT/DSS.
...More relevant models >>>>
Last one: 
next one: Related download