Home
>> Products
>> OMRON
>> Sensor
>> Photoelectric sensor
>> photoelectric sensor amplifier built-in
>> Photoelectric switch E3Z-T67-G0 OMRON E3Z-T67-G0
Photoelectric switch E3Z-T67-G0 OMRON E3Z-T67-G0
Brand:
OMRON
Name: Photoelectric switch
Model: E3Z-T67-G0
E3Z-T67-G0 detection methods: the firing pattern.
Connection: socket type (M8).
Detection range: 30m.
Output mode: NPN output.
Achieve small, long distance, save electricity and
Standard type of photoelectric sensor for energy saving
...More relevant models >>>>
Name: Photoelectric switch
Model: E3Z-T67-G0
E3Z-T67-G0 detection methods: the firing pattern.
Connection: socket type (M8).
Detection range: 30m.
Output mode: NPN output.
Achieve small, long distance, save electricity and
Standard type of photoelectric sensor for energy saving
Appearance: Shielded, 3.8 dia.
Stable sensing area: 0.8 (1.8) mm.
Separate Amplifier Sensor with.
Sensitivity Adjustment.
Compact design with smaller Sensor Head.
Heat-resistance model available for application between.
-10 and 200°C. Foreign matter on the surface of a vibrating object,
Offset core operation of the joint segment is poor, etc OMRON E3Z-T67-G0 . ,
Can refer to the waveform set, extraction E3Z-T67-G0
Joint detection of wrapping paper.
Fiber burr belt.
Drum segment detection.
Seam detection. Connection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 600 ± 400 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments OMRON E3Z-T67-G0 .
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.E3F3-T81 detection methods: the firing pattern,
Wire lead out type,
Type: Plastic appearance; PNP output,
Threaded cylindrical photoelectric sensor, built-in amplifier,
Photoelectric sensor with proximity sensor appearance
High anti interference with optoelectronic -IC technologyConnection method: Pre-wired OMRON E3Z-T67-G0 .
Cable length: 2 m.
Sensing distance: 100 ± 35 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements E3Z-T67-G0 OMRON.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications E3Z-T67-G0 OMRON.
Long-distance model for up to 1,000 mm. Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and dark-ON.
Complete lineeup including seven different shapes E3Z-T67-G0 OMRON E3Z-T67-G0 .
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator ccan be seen from many directions to enable,
installation in more locations OMRON E3Z-T67-G0 .
Connector with lock that mates with commercially available,
connectors.
Stable sensing area: 0.8 (1.8) mm.
Separate Amplifier Sensor with.
Sensitivity Adjustment.
Compact design with smaller Sensor Head.
Heat-resistance model available for application between.
-10 and 200°C. Foreign matter on the surface of a vibrating object,
Offset core operation of the joint segment is poor, etc OMRON E3Z-T67-G0 . ,
Can refer to the waveform set, extraction E3Z-T67-G0
Joint detection of wrapping paper.
Fiber burr belt.
Drum segment detection.
Seam detection. Connection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 600 ± 400 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments OMRON E3Z-T67-G0 .
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.E3F3-T81 detection methods: the firing pattern,
Wire lead out type,
Type: Plastic appearance; PNP output,
Threaded cylindrical photoelectric sensor, built-in amplifier,
Photoelectric sensor with proximity sensor appearance
High anti interference with optoelectronic -IC technologyConnection method: Pre-wired OMRON E3Z-T67-G0 .
Cable length: 2 m.
Sensing distance: 100 ± 35 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements E3Z-T67-G0 OMRON.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications E3Z-T67-G0 OMRON.
Long-distance model for up to 1,000 mm. Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and dark-ON.
Complete lineeup including seven different shapes E3Z-T67-G0 OMRON E3Z-T67-G0 .
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator ccan be seen from many directions to enable,
installation in more locations OMRON E3Z-T67-G0 .
Connector with lock that mates with commercially available,
connectors.
...More relevant models >>>>
Last one: OMRON Photoelectric switch E3Z-T62-G0 
next one: OMRON Compact Photoelectric Sensor E3Z-T61K
Related download