S8VS-12024AP-F | OMRON Switch Mode Power Supply S8VS-12024AP-F

S8VS-12024AP-F Introduce | S8VS-12024AP-F Catalog / Manual / Instructions / Software download

Brand: OMRON
Name: Switch Mode Power Supply
Model: S8VS-12024AP-F
Power ratings: 120 W.
Input voltage: 100 to 240 VAC(allowable range: 85 to 264 VAC or 80 to 370 VDC*1).
Output voltage: 24 V.
Output current: 5 A.
Alarm output *2: Sourcing.
UL Class 2 Output standards: --.
Model number(screwless terminal block).
60/90/120/180/240/480-W Models.
New Models with Indication.
Monitor and Simple Functions for.
Easy System Commissioning.
New 90-W models with indication monitor that.
conform to UL Class 2 Output standards.
New models with screwless terminal blocks and,
indication monitor.
Status displayed on 3-digit, 7-segment display.
Safety standards: UL 508/60950-1,
CSA C22.2 No. 107.1/60950-1,
EN 50178 (= VDE 0160), EN 60950-1 (= VDE 0805 Teil 1).
Input conditions: DC input is also possible from 80 to 370 VDC.
(Not compliant with EC Directives and other safety standards.)

Type: Reverse wiring.
Cable length L: 5.0 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Display contents: Decimal.
Type: Rear mounting.
Logic input: Negative.
Display color: Red/green/orange.
Digital Display with Wire-saving Serial OMRON S8VS-12024AP-F.
Transmission Function (B7A Output).
Single-color (red or green) and three-color (red, green, or,
orange selectable) displays with a character height of 80, 120,
or 200 mm are available for a variety of applications and locations S8VS-12024AP-F
Thin design with a 39.5-mm depth for the 120-mm model is,
perfect for saving space in equipment and devices.
Decimal display including negative sign (−) display with signal,
codes is possible OMRON S8VS-12024AP-F. Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase OMRON S8VS-12024AP-F.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation S8VS-12024AP-F OMRON.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions S8VS-12024AP-F OMRON. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Type: cable plug connector.
Contact number: 3.
Wiring simple and e-CON * specifications for connectors;
Ideal choice for connecting sensors S8VS-12024AP-F OMRON.
The connection of the spring clip which is verified by the industry is adopted.
Wiring is simple, no special tools required,
Can be re wiring (mainntenance) S8VS-12024AP-F.
Acceptable range for each connector
Stranded AWG28 (0.08mm2) ~ AWG20 (0.5mm2),
Any core wire size between.
(outer diameter: no more than 1.5mm).
A clamp capable of simultaneously connecting 4 lines when a connection iis also provided OMRON S8VS-12024AP-F.
UL standard (Document No. E103202) identified as a standard product.
Cable connector with the UL standard certification of products.
"

...More relevant models >>>>