LK166
Home >> Products >> OMRON >> Master slave station products >> DeviceNet >> Transistor Remote I/O Terminals DRT2-MD16 OMRON DRT2-MD16

Transistor Remote I/O Terminals DRT2-MD16 OMRON DRT2-MD16

Brand: OMRON
Name: Transistor Remote I/O Terminals
Model: DRT2-MD16
Specifications: I/O;
NPN (input: + common, output: - common);
Input: 8 points/Output: 8 points.
I/O connections: M3 Screw terminals.
Rated internal circuit power supply voltage:
Supplied from the communications connector.
Rated I/O power supply voltage: 24 VDC.
Allows I/O Expansion with Transistor Terminals.
Wide variety of data, such as maintenance system data,
can be collected without affecting the productivity,
of the control system.
Valuable information can be collected,
and managed through the network, including information,
on the communications power supply.
voltage levels, Unit wear and tear,
and equipment operating information.
Expansion via Expansion I/O Units.
With no communications baud rate settings,
required and detachable terminal blocks,
maintenance is easier.

Independent type, the function of the built-in controller is not RS-232C, the maximum 256 points.Name: Compact Connectors.
Specifications: Inputs; 4 outputs; PNP.
Bit slave of smallest class in industry,
Innovation in wiring for any type of machinery.
Available in 2 types: 2-point Bit Slave Unit,
and 4-point Bit Slave Unit OMRON DRT2-MD16.
Compact size for installation in limited space.
Save space and wiring since bit slave can be,
installed near I/O devices DRT2-MD16
Industry first bit slave connectable with round,
cables which can be easily purchased at a lower price.
Connectable with flat cables, too for easy wiring.
Cables are selectable depending on applications. Specifications: Outputs;
PNP (+ common); 32 points OMRON DRT2-MD16.
I/O connections: MIL connector.
Rated internal circuit power supply voltage:
Supplied from the communications connector.
Rated I/O power supply voltage: 24 VDC.
Very Compact 16-/32-point Remote Terminals.
Used in combination with Interface,
Conversion Boards (e.g., D-Sub) to,
connect to a wide range of interfaces.
35 x 60 x 80 mm (W x D x H). Unit: Connector model.
I/O classification: Digital input OMRON DRT2-MD16.
Internal I/O common: PNP (- common).
I/O points: 16.
I/O connections: Molex connector.
Power supplyvoltage: 24 VDC.
I/O specification: DC/transistor.
Digital I/O Units Compatible with MULTIPLE I/O TERMINAL,
Terminal block, connector, and high-density connector,
models are available DRT2-MD16 OMRON.
The circuit block of the terminal block model can be,
mounted or dismounted for ease of maintenance without,
disconnecting the wires DRT2-MD16 OMRON.
DIN track mounting. Classification: Analog Input Terminal.
I/O points: 1 to 4 (selectable with DIP switch).
Compact Analog Input Model is the,
Same Shape as 16-point Remote I/O Terminals.
Allows flexible input point settings up to a maximum of four points DRT2-MD16 OMRON.
Resolution: 1/6,000.
Takes only 1 ms to exchange each input point.
Wide input ranges available.
105 x 48 x 50 (W x H x D). Name: Clamp Terminal Blocks.
Specifications: Inputs; 8 inputs ; PNP; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cosst can be reduced DRT2-MD16.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee OMRON DRT2-MD16.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.


...More relevant models >>>>