LK166
Home >> Products >> OMRON >> Power/other peripheral devices >> Sensor I/O connector / sensor controller >> Sensor I/O connector >> XS3W-S423-402-R | OMRON Round Water-resistant Connectors XS3W-S423-402-R

XS3W-S423-402-R | OMRON Round Water-resistant Connectors XS3W-S423-402-R

Brand: OMRON
Name: Round Water-resistant Connectors
Model: XS3W-S423-402-R
No. of cable cores: 4.
Cable connection direction: Straight (socket)/Right-angle (plug).
Cable length L: 2 m.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles.

Model: PT (back-mounting), page 18, Wrapping terminals.
Approx: 10.4 g.
Number of pins: 8 pins.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available OMRON XS3W-S423-402-R.
New screwless models available. Power ratings: 15 W.
Input voltage: Single phase, 100 to 240 VAC, 90 to 350 VDC XS3W-S423-402-R
Output Voltage: 24 V.
Output current: 0.65 A.
Boost Current: 0.78 A.
Reliable and Easy Operation-Worldwide Power Supply.
Resistant in tough environments.
Easy and fast installation.
The most compact class on the market.
Universal input for worldwide applications:
100 to 240 VAC (85 to 264 VAC) OMRON XS3W-S423-402-R.
DC input can be available: 90 to 350 VDC.
Possible for 2-phase input usage.
Wide operation temperature range: –40 to 70 °C.
Power Boost function at 120%.
Safety standards:
UL508/60950-1, CSA C22.2 No. 107.1/60950-1.
EN50178, EN60950-1.
Lloyd’s standards, EN60204-1 PELV.
Safety of Power Transformers: EN61558-2-16.
ANSI/ISA 12.12.01 (excluding 480-W models).
CSA C22 OMRON XS3W-S423-402-R. 2 No.213 (excluding 480-W models).
15-W,30-W, and 60-W models conform to.
UL Class 2 output Standards.
EMS: EN 61204-3.
EMI: EN 61204-3 Class B.
Three years Warranty *1. Time specification: Inverse type.
Current setting range: 20 to 65 A XS3W-S423-402-R OMRON.
Operating voltage: 400/440 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase) XS3W-S423-402-R OMRON.
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button XS3W-S423-402-R OMRON.
The set time value can be checked easily because operation time,
is indicated ffrom the start of operation XS3W-S423-402-R.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON XS3W-S423-402-R. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.


...More relevant models >>>>
Related model