Home
>> Products
>> OMRON
>> Power/other peripheral devices
>> Connection / Save wiring equipment
>> Connector terminal station conversion unit
>> XW2Z-500S-V OMRON Host Link Cables
XW2Z-500S-V OMRON Host Link Cables
Brand:
OMRON
Name: Host Link Cables
Model: XW2Z-500S-V
SYSMAC PLC Units: C200HS-CPU31/33/21/23, CQM1-CPU21, CQM1-CPU41,
CQM1-CPU42, CQM1-CPU43, CQM1-CPU44, CV500/1000/2000, CVM1, CV500-LK201,
(Communications port 2), C200HE-CPU42, C200HG-CPU43/63, C200HX-CPU44/64,
C200HW-COM02, C200HW-COM04, C200HW-COM05, C200HW-COM06, CPM1-CIF01.
Cable length L: 5 m.
Host: Personal computer: IBM PC/AT or compatible.
Ideal Cables for between Programmable Controllers and Host Computers.
...More relevant models >>>>
Name: Host Link Cables
Model: XW2Z-500S-V
SYSMAC PLC Units: C200HS-CPU31/33/21/23, CQM1-CPU21, CQM1-CPU41,
CQM1-CPU42, CQM1-CPU43, CQM1-CPU44, CV500/1000/2000, CVM1, CV500-LK201,
(Communications port 2), C200HE-CPU42, C200HG-CPU43/63, C200HX-CPU44/64,
C200HW-COM02, C200HW-COM04, C200HW-COM05, C200HW-COM06, CPM1-CIF01.
Cable length L: 5 m.
Host: Personal computer: IBM PC/AT or compatible.
Ideal Cables for between Programmable Controllers and Host Computers.
Time specification: Inverse type.
Current setting range: 8 to 26 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage XW2Z-500S-V OMRON.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase XW2Z-500S-V
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions XW2Z-500S-V OMRON. Error will occur in the operating,
values of the overload elements. It is recommended to test operation, Type: With cable.
No. of poles: 4.
Lock: Rear lock.
Cable length: 0.5 m.
Minimum order: 10.
Round Water-resistive Smartclick.
Connectors That Reduce Installation Work XW2Z-500S-V OMRON.
A newly developed lock mechanism that is compatible with round M12 connectors.
Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock.
A positive click indicates locking.
Features the same degree of protection (IP67) as M12 connectors.
A full line-up of models is planned.
Connectors with Cables are UL approved. Measuring voltage: 1 to 10 V AC/DC, 3 to 30 V AC/DC, 15 to 150 V AC/DC.
Supply voltage: 200-230 VAC.
Ideal for voltage monitoring for industrial.
facilities and equipment.
Monitor for overvoltages or undervoltages.
Manual resetting and automaatically resetting supported by one Relay XW2Z-500S-V.
One SPDT output relay, 6 A at 250 VAC (resistive load).
Output relay can be switched between normally open and normally closed.
Process control signal (0 to 10 V) and current splitter input ssupported XW2Z-500S-V.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply.
Current setting range: 8 to 26 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage XW2Z-500S-V OMRON.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase XW2Z-500S-V
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions XW2Z-500S-V OMRON. Error will occur in the operating,
values of the overload elements. It is recommended to test operation, Type: With cable.
No. of poles: 4.
Lock: Rear lock.
Cable length: 0.5 m.
Minimum order: 10.
Round Water-resistive Smartclick.
Connectors That Reduce Installation Work XW2Z-500S-V OMRON.
A newly developed lock mechanism that is compatible with round M12 connectors.
Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock.
A positive click indicates locking.
Features the same degree of protection (IP67) as M12 connectors.
A full line-up of models is planned.
Connectors with Cables are UL approved. Measuring voltage: 1 to 10 V AC/DC, 3 to 30 V AC/DC, 15 to 150 V AC/DC.
Supply voltage: 200-230 VAC.
Ideal for voltage monitoring for industrial.
facilities and equipment.
Monitor for overvoltages or undervoltages.
Manual resetting and automaatically resetting supported by one Relay XW2Z-500S-V.
One SPDT output relay, 6 A at 250 VAC (resistive load).
Output relay can be switched between normally open and normally closed.
Process control signal (0 to 10 V) and current splitter input ssupported XW2Z-500S-V.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply.
...More relevant models >>>>
Last one: 
next one: Related download