Home
>> Products
>> OMRON
>> Power/other peripheral devices
>> Common socket / DIN guide / waterproof cover
>> Y92A-48G | OMRON Products Related to Common Sockets and DIN Tracks Y92A-48G
Y92A-48G | OMRON Products Related to Common Sockets and DIN Tracks Y92A-48G
Brand:
OMRON
Name: Products Related to Common Sockets and DIN Tracks
Model: Y92A-48G
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available.
...More relevant models >>>>
Name: Products Related to Common Sockets and DIN Tracks
Model: Y92A-48G
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available.
Time specification: Instantaneous type.
Current setting range: 8 to 26 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON Y92A-48G.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase Y92A-48G
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON Y92A-48G. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Suitable cable dia: 6 mm dia. model (5 to 6 mm dia.).
Suitable core size: 0.18 to 0.3mm; 0.5 to 0.75mm.
Suitable Sheath material: PVC, PE, PUR OMRON Y92A-48G.
Cable connection direction: Straight.
Connection method: Crimping.
DC: Model.
Minimum order: 50.
Water- and Environment-resistive FA.
Connectors Save Wiring and Maintenance Effort.
Compact FA connectors meet IP67 requirements and ensure a,
94V-0 fire retardant rating Y92A-48G OMRON.
A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime Y92A-48G OMRON.
Connectors with Cables and Connector Assemblies are available.
Three types of Connector Assembly: Crimping, soldering, and screw-on.
Connectors with Cables are UL certified.
Based on IEC61076-2-101 (IEC60947-5-2) and NECA 4202. The connector and terminal of the relay unit are integrated,
Save the wiring servo drive and position control unit Y92A-48G OMRON.
Servo driver andd control signal of position control unit,
Simple wiring on terminal stage Y92A-48G.
The connector without soldering, with only a screwdriver can wiring.
Dedicated connection cable between units.
DIN guide rail installation, the rapid installaation, screw installation of two methods OMRON Y92A-48G.
M3.0 thread terminals attached with a special plate signal.
The terminal can be confirmed by the signal name.
Current setting range: 8 to 26 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON Y92A-48G.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase Y92A-48G
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON Y92A-48G. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Suitable cable dia: 6 mm dia. model (5 to 6 mm dia.).
Suitable core size: 0.18 to 0.3mm; 0.5 to 0.75mm.
Suitable Sheath material: PVC, PE, PUR OMRON Y92A-48G.
Cable connection direction: Straight.
Connection method: Crimping.
DC: Model.
Minimum order: 50.
Water- and Environment-resistive FA.
Connectors Save Wiring and Maintenance Effort.
Compact FA connectors meet IP67 requirements and ensure a,
94V-0 fire retardant rating Y92A-48G OMRON.
A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime Y92A-48G OMRON.
Connectors with Cables and Connector Assemblies are available.
Three types of Connector Assembly: Crimping, soldering, and screw-on.
Connectors with Cables are UL certified.
Based on IEC61076-2-101 (IEC60947-5-2) and NECA 4202. The connector and terminal of the relay unit are integrated,
Save the wiring servo drive and position control unit Y92A-48G OMRON.
Servo driver andd control signal of position control unit,
Simple wiring on terminal stage Y92A-48G.
The connector without soldering, with only a screwdriver can wiring.
Dedicated connection cable between units.
DIN guide rail installation, the rapid installaation, screw installation of two methods OMRON Y92A-48G.
M3.0 thread terminals attached with a special plate signal.
The terminal can be confirmed by the signal name.
...More relevant models >>>>
Last one: OMRON Products Related to Common Sockets and DIN Tracks PL20
next one: OMRON Common socket /DIN guide rail related products PHC-12
Related download