ZC9CBFP21 FP PLC series CPU connecting cable (2 m) Proface ZC9CBFP21

Adapter for EX module (5 / set)Digital small keyboard with USB interface.COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters Proface ZC9CBFP21. The PC adapter for PCMCIA slot read CF card required ZC9CBFP21Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block.Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)10.4 inches (TFT), the replacement of the host backlight (1) Proface ZC9CBFP21. The MITSUBISHI Q series PLC is connected to GP, length: 5 m.5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).A veneer, for the GP4000 series back loading models of full flush (white, 1)10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories Proface ZC9CBFP21. For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models ZC9CBFP21 Proface. (2 / set)3.5 inch screen protective cover (1 pieces)USB cable to prevent disconnection of the fastening clip (5 / set)The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface ZC9CBFP21 Proface. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.The host controller is connected to the host compputer interface, which is used for multiple connection (n:1) communication ZC9CBFP21 Proface ZC9CBFP21. The Video-Mix module (262000 color video input, 4 channel x, DVI input DVI output x 1 channel, 1 channel x, VGA/SVGA/XGA) *1Support CANoppen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output Proface ZC9CBFP21. Up to 7 EX modules can be connected.