ZCACNDCS1 | Proface DC power adapter ZCACNDCS1

GLC2300 is not available10.4 inches (TFT), the replacement of the host backlight (1).Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2Used to install the man-machine interface to the fixed panel. (4 / set)Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputCOM2 terminal adapter for communication through the RS-422/485 connectionCable for connecting GP3000 to various modulesThe man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port Proface ZCACNDCS1 ZCACNDCS1 For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface ZCACNDCS1. GP3000H replacement label (5 sheets / set)For 5.7 inch models, for fixing the hooks of the three EX modules.1-0 DVI standard (DVI-D 24 pin convex connector)For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)3.8 inches, GP installed to the hard panel to provide dust and moisture proof function.Used for surface protection of man-machine interface from oil and chemical pollution (5 / set) Proface ZCACNDCS1. Used to install the GP3000H series to a commercially available support arm or panel.5.7 inches, installed to provide the function of dust and moisture7.0/7.5 inch screen protective cover (1 pieces)Extended cable for connecting USB (Type-A) (LT) interface ZCACNDCS1 Proface. Cable for connecting GP3000 to various modulesAdapter for EX module (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceWhen the man-machine interface is installed to the fixed panel to proovide dust proof and moisture proof function ZCACNDCS1 Proface ZCACNDCS1. (1)Used to output the image signal from the host computer to GPApply to GLC-2600/2500Length: 5 meters ZCACNDCS1 Proface. Used to display analog RGB (2 channels) on thhe GP3000Memory for extending EX GP-Pro alarm and character table functions Proface ZCACNDCS1. A veneer, for the GP4000 series back loading models of full flush (white, 1)