MITSUBISHI GT1595-XTBD User's Manual PDF

Used to install SD storage cards.
Applicable model: GT21. USB interface protection cover on the front panel of the host computer (for replacement).
For 5 GT1595-XTBD PDF. 7 inches.
Applicable models: GT15, GT11. For the graphic operation terminal on the back of the extra CF port (B disk).
Applicable models: GT16, GT15. Cable length: 1.2m.
For motion controller CPU (A series, the main base system) and the connection between GOT GT1595-XTBD
Applicable models: GT16, GT15, GT11. Cable length: 1.5m.
For the connection between QCPU and GOT.
Connection between a power supply and an operating switch and a GOT.
Applicable model: HandyGOT GT1595-XTBD PDF. Applicable models: GT11, HandyGOT8.4 inches.
Surface treatment: transparent.
Protective film color: No.
USB protective cover parts: no openings.
Set number: 5.
Applicable model: GT21. USB slave station (PictBridge), 1 channel for printer connection.
Applicable models: GT16, GT15,, GT27, GT25 GT1595-XTBD PDF GT1595-XTBD Manual . Protective film for 5.7 inch screen.
Transparent, 5.
Applicable model: GT105. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 12.1 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: SVGA (800 x 600) MITSUBISHI User's Manual.
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB) MITSUBISHI User's Manual.
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screeen system MITSUBISHI User's Manual GT1595-XTBD User's Manual.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two oor more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly GT1595-XTBD Manual .