Model : CV500-CPU01-V1.
SFC / Ladder 512 (with RAM30K words, the top internal link).Specifications: 8 Kwords without clock.Name: Two-tier Screw Terminal Block CS1W-SCB41-V1 PDF.
Specifications: Outputs; 16 outputs; NPN.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system
CS1W-SCB41-V1
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CS1W-SCB41-V1 PDF. Name: Screw Terminal Block with Relay Outputs.
Specifications: Outputs;
16 outputs; Contactss CS1W-SCB41-V1 Manual.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CS1W-SCB41-V1 PDF.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site OMRON Safety Precautions.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. C500-ID I/O Unit DC Input 64 pts C500-ID114(3G2A5-ID114).
DC12V 7mA.Connection type: Screw - Screw.
Description: Controller link repeater unit (wire to wire) OMRON Safety Precautions. Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Unit with MECHATROLINK-II interface.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder programming.
Control mode: Position control,
speed control or torque control;
No OMRON Safety Precautions. of axes: 4 axes.
No. of unit numberss allocated: 1 CS1W-SCB41-V1 Safety Precautions.
Current consumption : 5V, 0.36A; 24V,--.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes in,
a motion network with one Position,
Control Unit that supports MECHATROLINK-II CS1W-SCB41-V1 Manual.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.